# Copyright 1999-2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI=7
inherit linux-info mount-boot savedconfig multiprocessing

# In case this is a real snapshot, fill in commit below.
# For normal, tagged releases, leave blank
MY_COMMIT=""

if [[ ${PV} == 99999999* ]]; then
	inherit git-r3
	EGIT_REPO_URI="https://git.kernel.org/pub/scm/linux/kernel/git/firmware/${PN}.git"
else
	if [[ -n "${MY_COMMIT}" ]]; then
		SRC_URI="https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/snapshot/${MY_COMMIT}.tar.gz -> ${P}.tar.gz"
		S="${WORKDIR}/${MY_COMMIT}"
	else
		SRC_URI="https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/${P}.tar.xz"
	fi

	KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86"
fi

DESCRIPTION="Linux firmware files"
HOMEPAGE="https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git"

LICENSE="GPL-2 GPL-2+ GPL-3 BSD MIT || ( MPL-1.1 GPL-2 )
	redistributable? ( linux-fw-redistributable BSD-2 BSD BSD-4 ISC MIT )
	unknown-license? ( all-rights-reserved )"
SLOT="0"
IUSE="compress-xz compress-zstd initramfs +redistributable savedconfig unknown-license"
REQUIRED_USE="initramfs? ( redistributable )
	?? ( compress-xz compress-zstd )"

RESTRICT="binchecks strip test
	unknown-license? ( bindist )"

BDEPEND="initramfs? ( app-arch/cpio )
	compress-xz? ( app-arch/xz-utils )
	compress-zstd? ( app-arch/zstd )"

#add anything else that collides to this
RDEPEND="!savedconfig? (
		redistributable? (
			!sys-firmware/alsa-firmware[alsa_cards_ca0132]
			!sys-block/qla-fc-firmware
			!sys-firmware/iwl1000-ucode
			!sys-firmware/iwl6005-ucode
			!sys-firmware/iwl6030-ucode
			!sys-firmware/iwl3160-ucode
			!sys-firmware/iwl7260-ucode
			!sys-firmware/iwl3160-7260-bt-ucode
			!sys-firmware/raspberrypi-wifi-ucode
		)
		unknown-license? (
			!sys-firmware/alsa-firmware[alsa_cards_korg1212]
			!sys-firmware/alsa-firmware[alsa_cards_maestro3]
			!sys-firmware/alsa-firmware[alsa_cards_sb16]
			!sys-firmware/alsa-firmware[alsa_cards_ymfpci]
		)
	)"

QA_PREBUILT="*"

pkg_setup() {
	if use compress-xz || use compress-zstd ; then
		local CONFIG_CHECK

		if kernel_is -ge 5 19; then
			use compress-xz && CONFIG_CHECK="~FW_LOADER_COMPRESS_XZ"
			use compress-zstd && CONFIG_CHECK="~FW_LOADER_COMPRESS_ZSTD"
		else
			use compress-xz && CONFIG_CHECK="~FW_LOADER_COMPRESS"
			if use compress-zstd; then
				eerror "Kernels <5.19 do not support ZSTD-compressed firmware files"
			fi
		fi
		linux-info_pkg_setup
	fi
}

pkg_pretend() {
	use initramfs && mount-boot_pkg_pretend
}

src_unpack() {
	if [[ ${PV} == 99999999* ]]; then
		git-r3_src_unpack
	else
		default
		# rename directory from git snapshot tarball
		if [[ ${#GIT_COMMIT} -gt 8 ]]; then
			mv ${PN}-*/ ${P} || die
		fi
	fi
}

src_prepare() {
	default

	find . -type f -not -perm 0644 -print0 \
		| xargs --null --no-run-if-empty chmod 0644 \
		|| die

	chmod +x copy-firmware.sh || die

	if use initramfs; then
		if [[ -d "${S}/amd-ucode" ]]; then
			local UCODETMP="${T}/ucode_tmp"
			local UCODEDIR="${UCODETMP}/kernel/x86/microcode"
			mkdir -p "${UCODEDIR}" || die
			echo 1 > "${UCODETMP}/early_cpio"

			local amd_ucode_file="${UCODEDIR}/AuthenticAMD.bin"
			cat "${S}"/amd-ucode/*.bin > "${amd_ucode_file}" || die "Failed to concat amd cpu ucode"

			if [[ ! -s "${amd_ucode_file}" ]]; then
				die "Sanity check failed: '${amd_ucode_file}' is empty!"
			fi

			pushd "${UCODETMP}" &>/dev/null || die
			find . -print0 | cpio --quiet --null -o -H newc -R 0:0 > "${S}"/amd-uc.img
			popd &>/dev/null || die
			if [[ ! -s "${S}/amd-uc.img" ]]; then
				die "Failed to create '${S}/amd-uc.img'!"
			fi
		else
			# If this will ever happen something has changed which
			# must be reviewed
			die "'${S}/amd-ucode' not found!"
		fi
	fi

	# whitelist of misc files
	local misc_files=(
		copy-firmware.sh
		WHENCE
		README
	)

	# whitelist of images with a free software license
	local free_software=(
		# keyspan_pda (GPL-2+)
		keyspan_pda/keyspan_pda.fw
		keyspan_pda/xircom_pgs.fw
		# dsp56k (GPL-2+)
		dsp56k/bootstrap.bin
		# ath9k_htc (BSD GPL-2+ MIT)
		ath9k_htc/htc_7010-1.4.0.fw
		ath9k_htc/htc_9271-1.4.0.fw
		# pcnet_cs, 3c589_cs, 3c574_cs, serial_cs (dual GPL-2/MPL-1.1)
		cis/LA-PCM.cis
		cis/PCMLM28.cis
		cis/DP83903.cis
		cis/NE2K.cis
		cis/tamarack.cis
		cis/PE-200.cis
		cis/PE520.cis
		cis/3CXEM556.cis
		cis/3CCFEM556.cis
		cis/MT5634ZLX.cis
		cis/RS-COM-2P.cis
		cis/COMpad2.cis
		cis/COMpad4.cis
		# serial_cs (GPL-3)
		cis/SW_555_SER.cis
		cis/SW_7xx_SER.cis
		cis/SW_8xx_SER.cis
		# dvb-ttpci (GPL-2+)
		av7110/bootcode.bin
		# usbdux, usbduxfast, usbduxsigma (GPL-2+)
		usbdux_firmware.bin
		usbduxfast_firmware.bin
		usbduxsigma_firmware.bin
		# brcmfmac (GPL-2+)
		brcm/brcmfmac4330-sdio.Prowise-PT301.txt
		brcm/brcmfmac43340-sdio.meegopad-t08.txt
		brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt
		brcm/brcmfmac43362-sdio.lemaker,bananapro.txt
		brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt
		"brcm/brcmfmac43430a0-sdio.ONDA-V80 PLUS.txt"
		brcm/brcmfmac43430-sdio.AP6212.txt
		brcm/brcmfmac43430-sdio.Hampoo-D2D3_Vi8A1.txt
		brcm/brcmfmac43430-sdio.MUR1DX.txt
		brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt
		brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
		brcm/brcmfmac4356-pcie.gpd-win-pocket.txt
		# isci (GPL-2)
		isci/isci_firmware.bin
		# carl9170 (GPL-2+)
		carl9170-1.fw
		# atusb (GPL-2+)
		atusb/atusb-0.2.dfu
		atusb/atusb-0.3.dfu
		atusb/rzusb-0.3.bin
		# mlxsw_spectrum (dual BSD/GPL-2)
		mellanox/mlxsw_spectrum-13.1420.122.mfa2
		mellanox/mlxsw_spectrum-13.1530.152.mfa2
		mellanox/mlxsw_spectrum-13.1620.192.mfa2
		mellanox/mlxsw_spectrum-13.1702.6.mfa2
		mellanox/mlxsw_spectrum-13.1703.4.mfa2
		mellanox/mlxsw_spectrum-13.1910.622.mfa2
		mellanox/mlxsw_spectrum-13.2000.1122.mfa2
	)

	# blacklist of images with unknown license
	local unknown_license=(
		korg/k1212.dsp
		ess/maestro3_assp_kernel.fw
		ess/maestro3_assp_minisrc.fw
		yamaha/ds1_ctrl.fw
		yamaha/ds1_dsp.fw
		yamaha/ds1e_ctrl.fw
		ttusb-budget/dspbootcode.bin
		emi62/bitstream.fw
		emi62/loader.fw
		emi62/midi.fw
		emi62/spdif.fw
		ti_3410.fw
		ti_5052.fw
		mts_mt9234mu.fw
		mts_mt9234zba.fw
		whiteheat.fw
		whiteheat_loader.fw
		cpia2/stv0672_vp4.bin
		vicam/firmware.fw
		edgeport/boot.fw
		edgeport/boot2.fw
		edgeport/down.fw
		edgeport/down2.fw
		edgeport/down3.bin
		sb16/mulaw_main.csp
		sb16/alaw_main.csp
		sb16/ima_adpcm_init.csp
		sb16/ima_adpcm_playback.csp
		sb16/ima_adpcm_capture.csp
		sun/cassini.bin
		acenic/tg1.bin
		acenic/tg2.bin
		adaptec/starfire_rx.bin
		adaptec/starfire_tx.bin
		yam/1200.bin
		yam/9600.bin
		ositech/Xilinx7OD.bin
		qlogic/isp1000.bin
		myricom/lanai.bin
		yamaha/yss225_registers.bin
		lgs8g75.fw
	)

	if use !unknown-license; then
		einfo "Removing files with unknown license ..."
		rm -v "${unknown_license[@]}" || die
	fi

	if use !redistributable; then
		# remove files _not_ in the free_software or unknown_license lists
		# everything else is confirmed (or assumed) to be redistributable
		# based on upstream acceptance policy
		einfo "Removing non-redistributable files ..."
		local OLDIFS="${IFS}"
		local IFS=$'\n'
		set -o pipefail
		find ! -type d -printf "%P\n" \
			| grep -Fvx -e "${misc_files[*]}" -e "${free_software[*]}" -e "${unknown_license[*]}" \
			| xargs -d '\n' --no-run-if-empty rm -v

		[[ ${?} -ne 0 ]] && die "Failed to remove non-redistributable files"

		IFS="${OLDIFS}"
	fi

	restore_config ${PN}.conf
}

src_install() {
	./copy-firmware.sh -v "${ED}/lib/firmware" || die

	pushd "${ED}/lib/firmware" &>/dev/null || die

	# especially use !redistributable will cause some broken symlinks
	einfo "Removing broken symlinks ..."
	find * -xtype l -print -delete || die

	if use savedconfig; then
		if [[ -s "${S}/${PN}.conf" ]]; then
			local files_to_keep="${T}/files_to_keep.lst"
			grep -v '^#' "${S}/${PN}.conf" 2>/dev/null > "${files_to_keep}" || die
			[[ -s "${files_to_keep}" ]] || die "grep failed, empty config file?"

			einfo "Applying USE=savedconfig; Removing all files not listed in config ..."
			find ! -type d -printf "%P\n" \
				| grep -Fvx -f "${files_to_keep}" \
				| xargs -d '\n' --no-run-if-empty rm -v

			if [[ ${PIPESTATUS[0]} -ne 0 ]]; then
				die "Find failed to print installed files"
			elif [[ ${PIPESTATUS[1]} -eq 2 ]]; then
				# grep returns exit status 1 if no lines were selected
				# which is the case when we want to keep all files
				die "Grep failed to select files to keep"
			elif [[ ${PIPESTATUS[2]} -ne 0 ]]; then
				die "Failed to remove files not listed in config"
			fi
		fi
	fi

	# remove empty directories, bug #396073
	find -type d -empty -delete || die

	# sanity check
	if ! ( shopt -s failglob; : * ) 2>/dev/null; then
		eerror "No files to install. Check your USE flag settings"
		eerror "and the list of files in your saved configuration."
		die "Refusing to install an empty package"
	fi

	# create config file
	echo "# Remove files that shall not be installed from this list." > "${S}"/${PN}.conf || die
	find * ! -type d >> "${S}"/${PN}.conf || die
	save_config "${S}"/${PN}.conf

	if use compress-xz || use compress-zstd; then
		einfo "Compressing firmware ..."
		local target
		local ext
		local compressor

		if use compress-xz; then
			ext=xz
			compressor="xz -T1 -C crc32"
		elif use compress-zstd; then
			ext=zst
			compressor="zstd -15 -T1 -C -q --rm"
		fi

		# rename symlinks
		while IFS= read -r -d '' f; do
			# skip symlinks pointing to directories
			[[ -d ${f} ]] && continue

			target=$(readlink "${f}")
			[[ $? -eq 0 ]] || die
			ln -sf "${target}".${ext} "${f}" || die
			mv -T "${f}" "${f}".${ext} || die
		done < <(find . -type l -print0) || die

		find . -type f ! -path "./amd-ucode/*" -print0 | \
			xargs -0 -P $(makeopts_jobs) -I'{}' ${compressor} '{}' || die

	fi

	popd &>/dev/null || die

	if use initramfs ; then
		insinto /boot
		doins "${S}"/amd-uc.img
	fi
}

pkg_preinst() {
	if use savedconfig; then
		ewarn "USE=savedconfig is active. You must handle file collisions manually."
	fi

	# Fix 'symlink is blocked by a directory' Bug #871315
	if has_version "<${CATEGORY}/${PN}-20220913-r2" ; then
		rm -rf "${EROOT}"/lib/firmware/qcom/LENOVO/21BX
	fi

	# Make sure /boot is available if needed.
	use initramfs && mount-boot_pkg_preinst
}

pkg_postinst() {
	elog "If you are only interested in particular firmware files, edit the saved"
	elog "configfile and remove those that you do not want."

	local ver
	for ver in ${REPLACING_VERSIONS}; do
		if ver_test ${ver} -lt 20190514; then
			elog
			elog 'Starting with version 20190514, installation of many firmware'
			elog 'files is controlled by USE flags. Please review your USE flag'
			elog 'and package.license settings if you are missing some files.'
			break
		fi
	done

	# Don't forget to umount /boot if it was previously mounted by us.
	use initramfs && mount-boot_pkg_postinst
}

pkg_prerm() {
	# Make sure /boot is mounted so that we can remove /boot/amd-uc.img!
	use initramfs && mount-boot_pkg_prerm
}

pkg_postrm() {
	# Don't forget to umount /boot if it was previously mounted by us.
	use initramfs && mount-boot_pkg_postrm
}