hostapd-9999.ebuild
Download (6.9 KB)
# Copyright 1999-2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
inherit flag-o-matic systemd savedconfig toolchain-funcs
DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
S="${S}/${PN}"
if [[ ${PV} == 9999 ]]; then
inherit git-r3
EGIT_REPO_URI="https://w1.fi/hostap.git"
else
if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
else
SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
fi
# Never stabilize snapshot ebuilds please
KEYWORDS="~amd64 ~arm ~arm64 ~mips ~ppc ~x86"
fi
LICENSE="BSD"
SLOT="0"
IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps"
DEPEND="
internal-tls? ( dev-libs/libtommath )
!internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
kernel_linux? (
net-wireless/wireless-regdb
>=dev-libs/libnl-3.2:3
)
netlink? ( net-libs/libnfnetlink )
sqlite? ( dev-db/sqlite:3 )
"
RDEPEND="
${DEPEND}
selinux? ( sec-policy/selinux-hostapd )
"
BDEPEND="virtual/pkgconfig"
pkg_pretend() {
if use internal-tls; then
ewarn "internal-tls implementation is experimental and provides fewer features"
fi
}
src_unpack() {
# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
default
if [[ ${PV} == 9999 ]] ; then
git-r3_src_unpack
fi
}
src_prepare() {
# Allow users to apply patches to src/drivers for example,
# i.e. anything outside ${S}/${PN}
pushd ../ >/dev/null || die
default
popd >/dev/null || die
sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
"${S}/hostapd.conf" || die
}
src_configure() {
local CONFIG="${S}"/.config
restore_config "${CONFIG}"
if [[ -f "${CONFIG}" ]]; then
default
return 0
fi
# toolchain setup
echo "CC = $(tc-getCC)" > "${CONFIG}" || die
# EAP authentication methods
echo "CONFIG_EAP=y" >> "${CONFIG}" || die
echo "CONFIG_ERP=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_MD5=y" >> "${CONFIG}" || die
if use suiteb; then
echo "CONFIG_SUITEB=y" >> "${CONFIG}" || die
echo "CONFIG_SUITEB192=y" >> "${CONFIG}" || die
fi
if use internal-tls ; then
echo "CONFIG_TLS=internal" >> "${CONFIG}" || die
else
# SSL authentication methods
echo "CONFIG_DPP=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_FAST=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_MSCHAPV2=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_PEAP=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_PWD=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_TLS=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_TTLS=y" >> "${CONFIG}" || die
echo "CONFIG_OWE=y" >> "${CONFIG}" || die
echo "CONFIG_SAE=y" >> "${CONFIG}" || die
echo "CONFIG_TLSV11=y" >> "${CONFIG}" || die
echo "CONFIG_TLSV12=y" >> "${CONFIG}" || die
fi
if use wps; then
# Enable Wi-Fi Protected Setup
echo "CONFIG_WPS=y" >> "${CONFIG}" || die
echo "CONFIG_WPS2=y" >> "${CONFIG}" || die
echo "CONFIG_WPS_UPNP=y" >> "${CONFIG}" || die
echo "CONFIG_WPS_NFC=y" >> "${CONFIG}" || die
einfo "Enabling Wi-Fi Protected Setup support"
fi
echo "CONFIG_EAP_IKEV2=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_TNC=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_GTC=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_SIM=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_AKA=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_AKA_PRIME=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_EKE=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_PAX=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_PSK=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_SAKE=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_GPSK=y" >> "${CONFIG}" || die
echo "CONFIG_EAP_GPSK_SHA256=y" >> "${CONFIG}" || die
einfo "Enabling drivers: "
# drivers
echo "CONFIG_DRIVER_HOSTAP=y" >> "${CONFIG}" || die
einfo " HostAP driver enabled"
echo "CONFIG_DRIVER_WIRED=y" >> "${CONFIG}" || die
einfo " Wired driver enabled"
echo "CONFIG_DRIVER_NONE=y" >> "${CONFIG}" || die
einfo " None driver enabled"
einfo " nl80211 driver enabled"
echo "CONFIG_DRIVER_NL80211=y" >> "${CONFIG}" || die
# epoll
echo "CONFIG_ELOOP_EPOLL=y" >> "${CONFIG}" || die
# misc
echo "CONFIG_DEBUG_FILE=y" >> "${CONFIG}" || die
echo "CONFIG_PKCS12=y" >> "${CONFIG}" || die
echo "CONFIG_RADIUS_SERVER=y" >> "${CONFIG}" || die
echo "CONFIG_IAPP=y" >> "${CONFIG}" || die
echo "CONFIG_IEEE80211R=y" >> "${CONFIG}" || die
echo "CONFIG_IEEE80211W=y" >> "${CONFIG}" || die
echo "CONFIG_IEEE80211N=y" >> "${CONFIG}" || die
echo "CONFIG_IEEE80211AC=y" >> "${CONFIG}" || die
echo "CONFIG_IEEE80211AX=y" >> "${CONFIG}" || die
echo "CONFIG_OCV=y" >> "${CONFIG}" || die
echo "CONFIG_PEERKEY=y" >> "${CONFIG}" || die
echo "CONFIG_RSN_PREAUTH=y" >> "${CONFIG}" || die
echo "CONFIG_INTERWORKING=y" >> "${CONFIG}" || die
echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> "${CONFIG}" || die
echo "CONFIG_HS20=y" >> "${CONFIG}" || die
echo "CONFIG_WNM=y" >> "${CONFIG}" || die
echo "CONFIG_FST=y" >> "${CONFIG}" || die
echo "CONFIG_FST_TEST=y" >> "${CONFIG}" || die
echo "CONFIG_ACS=y" >> "${CONFIG}" || die
if use netlink; then
# Netlink support
echo "CONFIG_VLAN_NETLINK=y" >> "${CONFIG}" || die
fi
if use ipv6; then
# IPv6 support
echo "CONFIG_IPV6=y" >> "${CONFIG}" || die
fi
if use sqlite; then
# Sqlite support
echo "CONFIG_SQLITE=y" >> "${CONFIG}" || die
fi
if use kernel_linux; then
echo "CONFIG_LIBNL32=y" >> "${CONFIG}" || die
append-cflags "$($(tc-getPKG_CONFIG) --cflags libnl-3.0)"
fi
# TODO: Add support for BSD drivers
default
}
src_compile() {
emake V=1
if ! use internal-tls; then
emake V=1 nt_password_hash
emake V=1 hlr_auc_gw
fi
}
src_install() {
insinto /etc/${PN}
doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
fperms -R 600 /etc/${PN}
dosbin ${PN}
dobin ${PN}_cli
if ! use internal-tls; then
dobin nt_password_hash hlr_auc_gw
fi
newinitd "${FILESDIR}/${PN}-init.d" ${PN}
newconfd "${FILESDIR}/${PN}-conf.d" ${PN}
systemd_dounit "${FILESDIR}/${PN}.service"
doman ${PN}{.8,_cli.1}
dodoc ChangeLog README
use wps && dodoc README-WPS
docinto examples
dodoc wired.conf
insinto /etc/log.d/conf/services/
doins logwatch/${PN}.conf
exeinto /etc/log.d/scripts/services/
doexe logwatch/${PN}
save_config .config
}
pkg_postinst() {
einfo
einfo "If you are running OpenRC you need to follow this instructions:"
einfo "In order to use ${PN} you need to set up your wireless card"
einfo "for master mode in /etc/conf.d/net and then start"
einfo "/etc/init.d/${PN}."
einfo
einfo "Example configuration:"
einfo
einfo "config_wlan0=( \"192.168.1.1/24\" )"
einfo "channel_wlan0=\"6\""
einfo "essid_wlan0=\"test\""
einfo "mode_wlan0=\"master\""
einfo
#if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
# einfo "This package now compiles against the headers installed by"
# einfo "the kernel source for the mac80211 driver. You should "
# einfo "re-emerge ${PN} after upgrading your kernel source."
#fi
if use wps; then
einfo "You have enabled Wi-Fi Protected Setup support, please"
einfo "read the README-WPS file in /usr/share/doc/${PF}"
einfo "for info on how to use WPS"
fi
}
| ||