11/06/2018

11:11 pm Hardware: RE: grapics card change

Thanks for reply. I have similar problem - but i want to switch from radeon to nouveau.
Nouveau is intalled but afte... Valentin Munitsa

03:18 pm Calculate Directory Server: cl-console-gui stops on crashing python2.7

Hi folks!
I'm facing weird problem with python2.7 on my host machine (CLD), while installing CDS server using the cl... Marek Matej

10/31/2018

04:11 pm General: RE: I have a dilemma

I only install ~ amd64 programs. I do this because constantly plasma developers and many others insist on 64-bit prog... dragan legic

03:46 pm General: RE: I have a dilemma

The CL will be unstable if it uses ~amd64 for all packets. Most CLD packages are stable in Portage. Alexander Tratsevskiy

12:07 pm General: RE: I have a dilemma

Thanks for the explanation. I did not know CL is unstable, I'm searching on the Internet and I always get explanation... dragan legic

10:16 am General: RE: I have a dilemma

Hi,
CL has never been a stable Gentoo, in it you can always find a compromise between stable libraries and the lates... Alexander Tratsevskiy

10:00 am General: RE: Where is Calculate 18 in the list?

Hi,
The system numbering is not determined by the profile. The profile does not depend on version numbers.
Alexander Tratsevskiy

09:40 am General: I have a dilemma

I have a dilemma I can not solve. I have Calculate KDE and 99.9% of the program is from gentoo sources and 0.1% is Ca... dragan legic

10/30/2018

01:53 pm General: Where is Calculate 18 in the list?

Where is Calculate 18 in the list:*eselect profile list*
https://www.calculate-linux.org/blogs/en/705/show
Calcul... dragan legic

10:42 am FR : Discussions: RE: CLDL version 20181025 dysfonctionne

Mea culpa : effectivement comme la CLDL n'est pas encore dispo officiellement, j'aurais dû consulter les rapports de ... Lionel LM

06:32 am FR : Discussions: RE: CLDL version 20181025 dysfonctionne

Bonjour,
CLDL n'est pas encore au point, non dispo officiellement et donc en cours de dévelppement.
J'ai signalé ce... Adrien Duck

10/29/2018

10:25 pm FR : Discussions: RE: CLDL version 20181025 dysfonctionne

Idem, test non concluant : chez moi quand l'écran se met en veille et que je déverrouille avec mon mot de passe, l'éc... Lionel LM

10/28/2018

04:31 pm FR : Discussions: RE: imposible de mettre calculate sur mon pc

Ton post est au bon endroit maintenant.
As-tu fait une somme de contrôle après le téléchargement ? (genre md5sum ou ... Lionel LM

03:55 pm FR : Discussions: RE: CLDL version 20181025 dysfonctionne

Bonjour Lionel
Mon essai n'est pas via une marchine virtuelle. Mais bien une installation sur un DD SSD.
Merci de... Ucar 40

01:17 pm FR : Discussions: RE: imposible de mettre calculate sur mon pc

Bonjour,
Ce n'est pas le bon endroit pour de l'aide : ici ce sont les tutos.
Je te conseille https://www.calculat... Lionel LM

01:05 pm FR : Discussions: RE: CLDL version 20181025 dysfonctionne

Salut,
As-tu essayé en machine virtuelle ?
Je vais tester aujourd'hui je pense et donnerai mes résultats.
A bientôt Lionel LM

10:37 am General: RE: Teamviewer has no gui after the start

Start: 2018/10/26 23:35:57.391 (UTC+0:00)
Version: 13.2.13582
ID: 0
Loglevel: Info (100)
License: 0
Server: mast... dragan legic

10/27/2018

04:01 pm FR : Discussions: CLDL version 20181025 dysfonctionne

Bonjour,
Je viens d'essayer la Calculate avec l'environnement LXQt.
Le gestionnaire de fichier PCManFM s'ouvre bi... Ucar 40

10/26/2018

07:06 pm General: Cant Update and Console wont run

I have been trying fix may system as it wont update anymore, and i cant use Browsers with the sandbox
https://www.... chris whittaker

01:31 pm General: RE: Mouse pointer is freezing

calculate ~ # emerge @module-rebuild
--- Invalid atom in /etc/portage/package.keywords/custom: sys-kernel/git-source... Dj D

06:23 am General: RE: Mouse pointer is freezing

Very strange, is the system updated? Alternatively, you can try to install the kernel 4.19.0. Alexander Tratsevskiy

10/25/2018

12:30 am Hardware: RE: [SOLVED] Problem with Ryzen CPU and KDE Upgrade

The latest kde plus ksudoku upgrade plus reboot fixes the problem.
Thank you. BH Reach

10/24/2018

06:19 pm General: RE: Mouse pointer is freezing

I have been using touchpad on my laptop. Dj D

12:22 pm General: RE: Mouse pointer is freezing

Hi,
Try plugging the mouse into another USB connector. Alexander Tratsevskiy

07:07 am General: Mouse pointer is freezing

Hello to all!
I have been using Calculate 17.12.2.
Recently, my mouse pointer is freezing, and I can't do anythin... Dj D

10/22/2018

10:51 pm General: layman pining?

Is it possible to pininig in layman.conf so that calculate puts the highest priority, while other layman repositories... dragan legic

05:18 am Hardware: [SOLVED] Problem with Ryzen CPU and KDE Upgrade

The latest KDE upgrade broke Ksudoku on my Ryzen CPU computer. I tested Ksudoku on 2 other computers with older CPU's... BH Reach

10/20/2018

11:00 am General: RE: Teamviewer has no gui after the start

I had version 10 and she worked on KDE Plasma (CLD), I made a update to teamviewer 13 and he worked. After that, I di... dragan legic

12:55 am General: RE: Teamviewer has no gui after the start

Teamviewer 11 at least "seems to be able to be started":https://wiki.gentoo.org/wiki/TeamViewer#OpenRC in Gentoo syst... Jose Jurado

10/19/2018

03:25 pm General: RE: Teamviewer has no gui after the start

I read Arch help and read incredible things. Teamviewer can only work with systemd, login manager lightdm and lib32-f... dragan legic

01:07 pm Calculate Linux Scratch: RE: How to use LTS kernel?

We counted on that, thanks for the info. Alexander Tratsevskiy

07:54 am General: RE: Teamviewer has no gui after the start

. vmolution wrote:
> Hi,
> Do you have other information in your gui.log? Since you said you got libQt5X11Extras.so... dragan legic

07:03 am Calculate Linux Scratch: RE: How to use LTS kernel?

Thanks for the info.
It has been announced that the next LTS kernel will be 4.19.
4.19-rc8 was released a few d... BH Reach

06:21 am Calculate Linux Desktop XFCE: RE: How to Customize live USB Calculate Linux XFCE?

Hi,
To change the image there are graphical and console utilities (cl-builder). You can modify the ISO from the inst... Alexander Tratsevskiy

06:03 am Calculate Linux Scratch: RE: How to use LTS kernel?

Hi,
There are always exceptions to the rules. At the stage of preparation of the release, several modern motherboard... Alexander Tratsevskiy

10/18/2018

09:00 pm General: RE: Teamviewer has no gui after the start

I have nothing in the gui.log. I found information about the file based on your writing, started Dolphin and the sera... dragan legic

08:39 pm General: RE: Teamviewer has no gui after the start

Hi,
Do you have other information in your gui.log? Since you said you got libQt5X11Extras.so.5 and qtx11extras
. vmolution

04:03 pm General: RE: Teamviewer has no gui after the start

I can not believe that no one has a teamviewer solution. The answer to the program does not mean anything, I get such... dragan legic

04:01 pm General: RE: Teamviewer has no gui after the start

I can not believe that no one has a teamviewer solution. The answer to the program does not mean anything, I get such... dragan legic

10/17/2018

05:38 pm General: RE: Bloated Calculate Linux

Thank you very much! It works! Dj D

04:33 pm General: RE: Teamviewer has no gui after the start

I have this file libQt5X11Extras.so.5 and qtx11extras can be installed 5.9.6. When I installed Teamviewer 13 he worke... dragan legic

12:55 pm General: RE: Teamviewer has no gui after the start

I downloaded the extract version, running on LIVE CLDXFCE
https://download.teamviewer.com/download/linux/teamviewer_... . vmolution

12:13 pm Calculate Linux Desktop XFCE: How to Customize live USB Calculate Linux XFCE?

Hi Calculate Linux Desktop XFCE,
Could anyone share how to customize the XFCE USB bootable Calculate Linux?
Cou... . vmolution

10/16/2018

06:31 pm Calculate Linux Scratch: How to use LTS kernel?

The docs say:
"Calculate Linux uses LTS kernels."
It is not doing that on my system. It appears to be using the... BH Reach

05:55 pm General: RE: Teamviewer has no gui after the start

CLDX 18, 64 bit, after update not working Teamviewer.
Update
Started emerge on: Oct 07, 2018 22:49:04
emerg... sasa brks

04:14 pm General: RE: Teamviewer has no gui after the start

Thanks in the picture but Sasa has CLDX 18 and the teamviewer program worked only until the first update. The same si... dragan legic

03:37 pm General: RE: Teamviewer has no gui after the start

!teamviewer.png!
I tried to install - everything works fine. I am using CLDX 18. I attach a screenshot. Alexander Tratsevskiy

02:33 pm General: RE: Teamviewer has no gui after the start

Please help me
* Calculating dependencies ... ... dragan legic

10/15/2018

05:06 pm General: RE: Teamviewer has no gui after the start

What's happening? I started a manual update eix-sync, cl-update and he is trying to update the programs to an unstabl... dragan legic

12:30 pm General: RE: Teamviewer has no gui after the start

Has anyone noticed a question and a problem for teamviewer 13? In other linux teamviewer 13 works normally. I have KD... dragan legic

10/14/2018

05:41 pm Calculate Linux Desktop XFCE: RE: [solved] syslog-ng consumes too high CPU usage, 40% to 53%

To set this permanently in live usb,
1. open terminal
2. su
3. leafpad /run/initramfs/live/boot/grub/grub.cfg
4... . vmolution

05:10 pm Calculate Linux Desktop XFCE: RE: syslog-ng consumes too high CPU usage, 40% to 53%

Adding pci=noaer during boot, press [e] in grub solves this issue, found this in ubuntu thread on internet.
Thanks... . vmolution

08:10 am Calculate Linux Desktop XFCE: [solved] syslog-ng consumes too high CPU usage, 40% to 53%

Hi Calculate Linux Desktop,
I boot from USB pendrive on HP laptop, notice the CPU usage is very high for syslog-ng... . vmolution

10/13/2018

07:01 pm Calculate Linux Desktop KDE: RE: Can't unlock KDE session

Hi Jose,
Thank you for the kind concern, I have been following your hint but unfortunately it did'nt solve.
That ... Silvio Arnone

02:19 pm Calculate Linux Desktop KDE: RE: Can't unlock KDE session

Hi Silvio,
Hopefully this will help, as on a previous install of Calculate Linux (xfce version) a few months ago I... Jose Jurado

10:37 am General: RE: Teamviewer has no gui after the start

update packet before teamviewer stop work
quiet-build=n --verbose --getbinpkg --usepkg @world
1539369197: >>> e... dragan legic

10/12/2018

10:26 pm General: RE: Teamviewer has no gui after the start

Today I did an update CLD and the program stopped working
Teamviewer has no gui after launch, version 13.2.13582
... dragan legic

03:27 pm FR : Discussions: RE: Installation en simple boot sur 2 disques{ (/dev/nvme0n1) & (/dev/sda) ]: c...

Bonjour,
En prenant l'officielle Iso de la 18 en mode graphique, voilà ce que j’obtiens:
à la phase " On désarchive... L Espace Uniste

01:14 am General: Teamviewer has no gui after the start

Teamviewer has no gui after launch, version 13.2.13582.
~ $ teamviewer
Init...
CheckCPU: SSE2 support: yes
Ch... sasa brks

10/11/2018

07:43 pm FR : Discussions: RE: Installation en simple boot sur 2 disques{ (/dev/nvme0n1) & (/dev/sda) ]: c...

Merci Aurélien, je vais tenter dés que mon travail m'accordera un peu de temps.
Je ne manquerai pas de vous faire pa... L Espace Uniste

10/10/2018

11:31 pm Calculate Linux Desktop KDE: Can't unlock KDE session

Hi All,
On my fresh install of CLD 18 (multiboot, Nvidia driver installed) I have the problem as in the title, I d... Silvio Arnone

10/09/2018

12:13 am General: RE: Upgrade to 18

Thanks again! polaca 57

10/08/2018

09:25 pm General: RE: Upgrade to 18

We are gradually increasing the number of packages in the repository in parallel by resolving dependencies. Alexander Tratsevskiy

07:44 pm General: Upgrade to 18

Upgrade was not automatic as a package keyword was required to be added
=net-dns/libidn2-2.0.5 ~amd64
After tha... polaca 57

07:40 pm Calculate Linux Desktop MATE: RE: Linux install stuck on white screen.

Only your free radeon drivers are for your graphics card dragan legic

« Previous

Next »