Activity
From 12/23/2017 to 01/21/2018
01/21/2018
-
09:31 pm General: Home folder encrypten after installation?
- Hey Calculate Friends,
just wondering how would you encrypt your home folder after you installed Calculate Linux a... -
- Just a wild guess, but try to chmod +x one of your scripts and see if it works.
-
08:24 pm Calculate Linux Desktop MATE: RE: Mate brisk-menu
- Hi,
brisk-menu is not stable in my overlay.
It doesn't work, and i don't understand why :( -
06:55 pm Calculate Linux Desktop MATE: Mate brisk-menu
- Hi,
i want to use the mate brisk-menu and therefore i tried to install it from adrien overlay.
it installed fin... -
03:03 pm FR : Discussions: Pas de bott/efi
- Bonjour,
j'essaie d'installer Calculate Cinnamon en UEFI, j'ai fait ma partition en FAT32 avec les drapeaux esp et... -
01:18 pm General: Not Quite sure
- Not really sure how im supposed to continue......can I just uninstall Skype if thats the issue as i Never use it .......
-
12:59 am General: Scripts in /etc/local.d do not seem to start
- ...
01/20/2018
-
- Bonjour,
J'ai fait ce test en virtualisant Calculate ...
https://www.system-linux.eu/index.php?post/2018/01/09... -
- Hi,
Not necessary.
System full optoimized now -
04:39 pm General: question about system update
- http://www.calculate-linux.org/main/en/optimization_of_system -> is that safe? necessary? article is written for vers...
-
- Le miroir était indisponible sans doute.
En relançant la mise à jour il devrait choisir un autre miroir s'il n'est p... -
- Non, je suis passé sur une autre distribution mais là, je vais tester la version Cinnamon.
01/19/2018
-
04:08 pm FR : Discussions: RE: Cherche deux logiciels
- Bonjour,
Je cherche aussi à installer grub-customizer, donc je souhaitais savoir si tu as trouvé une solution. -
- Bonjour,Merci de ton Aide !
--2018-01-17 21:51:15-- http://miroir.linuxtricks.fr/calculate/grp/x86_64/dev-libs/...
01/18/2018
-
05:33 pm Calculate Linux Desktop XFCE: RE: [ imagewriter ] and ( Light-Locker-Settings ) and ( PackageKit )
- Alexander Tratsevskiy wrote:
> The portage is no such package. The overlays only unstable versions (https://gpo.zuga... -
- Bon, je ne vois pas ce qui coince.
Il me faudrait le contenu du fichier log qui est en echec (par exemple '/var/calc... -
- Hi Guys, ;)
Now .. How you install ( light-locker-settings ) and ( PackageKit ) ??
http://imagesia.com/screensh...
01/17/2018
-
10:31 pm General: RE: full disk encryption supported?
- Thanks for the response. I have needs for full disk encryption. Thankfully I was able to get that to work with Calcul...
-
- Hi !
Try to run the
*cl-setup-boot*
command to do the boot again.
The cleaner is to install again your disribut... -
- Bonsoir Adrien,
Merci de ton aide !
Après avoir lancer emerge voici les messages :
emerge -avuuDN --with-bdeps... -
- Hi,
I copied my running Calculate Linux to a SSD . But after reboot it boots slowlier as with HDD.
- shall I r...
01/16/2018
-
08:08 pm General: RE: full disk encryption supported?
- Hi Herminio,
The CL supports the encryption of user files. This is done for maximum performance and ease of use, bec... -
- I would like to does calualte linux support full disk encryption? I went through the installer and did not see an opt...
01/15/2018
-
- If you already have a CL, you can use 'cl-install-flash'. Unlike other utilities, it formats a USB flash drive in fat...
01/13/2018
-
07:02 pm General: RE: Stuck during Installation on existing partitions using the latest ISO (17.12)
- For the record, to install on existing partitions during the install:
- at "installation type" tab, select "bla...
01/12/2018
-
- Salut,
Essaie de faire la mise jour dans un premier temps avec emerge "classiquement" :... -
- bonjour, j'ai déjà demandé de l'aide mais sans resultat, y compris canal irc.
x.callback(x.pid, wait_retval[1], x...
01/11/2018
-
01:09 am General: RE: Installation of beyond compare
- you could mask the whole overlay except bcompare
To mask all packages of an overlay the syntax in /etc/portage/pac...
01/10/2018
-
- I think it is possible to get the last version automatically, then do the rest.
As soon as I get Calculate installed... -
10:36 am General: RE: Installation of beyond compare
- So it's better to add ebuild with newer version.
-
- why not install it from the gentoo-zh overlay with layman?
http://gpo.zugaina.org/app-misc/bcompare... -
- Weird, I can't reinstall using the installer.
I am trying to get the ISO from the version of calculate of July, im... -
- update:
the ebuild has this :
SRC_URI="
x86? ( http://www.scootersoftware.com/bcompare-${PV}.i386.tar.gz )
... -
- Hi,
so after reading some docs
* emerge layman
* layman -a gentoo-zh
* layman -S
then
* emerge app-misc/...
01/09/2018
-
- I really think this is a good solution.
btw I need improved one because of my activity and I am ready to buy high e... -
04:13 pm Calculate Linux Desktop KDE: RE: Unable to boot CLD 17.12 x86-64 live USB
- x y wrote:
> if you are on winblowz try with rufus. if on lin try with dd if=iso_file of=/dev/your_usb bs=4M
> i di... -
- Tomasz Kaczmarczyk wrote:
> It looks like your issue is similar to that one
> http://www.calculate-linux.org/boards... -
- Bonjour à Tous,
J'ai réussit grâce à Adrien, sur le forum il donnait une ligne de commande à la Gentoo, et du coup... -
11:14 am General: RE: CDS install failed - list index out of range
- Try to use last ISO image.
-
- Hi Brad,
Calculate Linux Scratch is best. You can use the cl-builder* utilities. Unfortunately the guide is not tran... -
- Hi Nadir,
The CL has a ready-made encryption solution for user directories. The entire system is not encrypted. We c... -
- Hi Brad,
We recently had a group in the Telegram messenger, where users post their screenshots and settings. The gro... -
- Didnt see any offtopic or media section to share setups and so forth so ill start a thread here. Hopefully not a n is...
-
- Bonsoir à Tous,
Pourriez-vous m'aidez car je n'arrive pas à faire la mise à jour, voici le message:
Installation ...
01/08/2018
-
- there are 2 flags set:boot & esp on this partition.
-
- Thanks man.
I now just need to learn layman and the rest ;-)
-
- the Answer is yes, I am using it on an recent HP laptop.
-
- the boot & esp flags where already there ;-(
-
- i deleted all config and set config again and it seems ok...for now
-
- if you are on winblowz try with rufus. if on lin try with dd if=iso_file of=/dev/your_usb bs=4M
i did this (once wit... -
- It looks like your issue is similar to that one
http://www.calculate-linux.org/boards/15/topics/36635
You can try... -
- Try to use that layman instead deb2targz
http://gpo.zugaina.org/app-misc/bcompare
Don't forget to mask all packag... -
- glad its been helpful, and calculate is now my main, has been for some time now.
-
- hi folks!
So I downloaded iso, check md5sum, prepare USB flash drive using unetbootin.
Tried to boot on my Thinkp... -
09:56 am General: RE: updates question (SOLVED)
- Thanks much guys!
I've learned from this discussion. I am very pleased Calculate is rolling release. I finally did t...
01/07/2018
-
- Ok,
I can try.
I'll do that tomorrow.
Thanks ! -
- i found this
>>An EFI System partition is distinguished by its GUID type C12A7328-F81F-11D2-BA4B-00A0C93EC93B, no... -
- Hi,
I managed to install this tool : beyond compare in my previous calculate setup (it was last summer, so it was on... -
- I want to replace my current Antergos installation.
In order to do that, I need a full LUKS (without LVM) system set... -
- Hi,
impossible to install on existing partitions using the latest ISO.
I have a previously installed calculate vers... -
02:26 am Calculate Linux Desktop KDE: RE: smplayer problem
- Quick look at smplayer settings suggests this might be the fix.
Preferences-Subtitles, uncheck "Use first available ...
01/06/2018
-
- yeh its worth a shot trying the new kernel, think its amdgpu related issue not sure entirely. if you are to try the 4...
-
- Thanks a lot Brad,
saw you had trouble and thought i sit this trouble out for now ;-) -
- there is an checkbox option in gui update window the first option is for only stable updates see image
!http://i67.t... -
- Hi there,
just wondering how you set the Calculate System to only install and update stable releases.
Also, how... -
- thanks for the advice polaca but no dont have intel graphics got the ASROCK all in one motherboard using the built in...
-
- Hi Brad,
I think you mentioned you have an AMD GPU?
Just a suggestion from past experience. If you have Intel graph...
01/05/2018
-
- Alexander Tratsevskiy wrote:
> Hi Brad,
> I hope now I have no problems with a new kernel. Try to unmask and boot w... -
- ow excellent its been fixed? once gentoo finished installing on Virtualbox will unmask and install the 4.14.9 kernel....
-
- Hi Brad,
I hope now I have no problems with a new kernel. Try to unmask and boot with the new kernel. -
- Hi,
I also have Dell XPS13. Great laptop. CL is installed without problems. -
09:48 am General: RE: Calculate KDE spares a lot of space
- [ 884.9 K ] Packages Index
===========
[ 2.6 G ] Total space from 609 files were freed in the packages direct...
01/04/2018
-
- I observed same thing...
-
- I tried to clean it / but that's not possible. How much space will I need in a year or two if I keep Calculate. Somet...
-
- Calculate KDE spares a lot of space, I have in Neon KDE many more programs and it occupies 13GB on /. In calculate bu...
01/03/2018
-
- i decided to build my own system with i3wm, i think scratch is the way to go. is there any documentation on how this ...
-
- thanks for the info appreciate it.
-
- I am noob to Calculate myself, but when I wanted to block a package from being upgraded to newer version I edited exi...
01/02/2018
-
02:21 am General: CDS install failed - list index out of range
- start a fresh new install failed this morning
ENV: vmware esx 5.1
install steps:
1.boot with CDS-LiveCD
2.layma... -
- i have updates available and one of the packages in the update is calculate-sources-4.14.9 and i dont want this kerne...
-
12:39 am General: Can Calculate Linux handle NVMe drives yet?
- About an 18 months ago I got a Dell XPS 15 9550 that has an NVMe drive. For the life of me, I couldn't get calculate ...
01/01/2018
-
- My English is bad, but did you understand the point and what I wrote, the man wrote that it's a command lsb_release p...
-
- doesnt work for me either ...
-
- Adrien Daugabel wrote:
if you run
lsb_release -a
It's written Calculate Linux Desktop 17.12 !
Tomas... -
- I tried that...
-
- Adrien Daugabel wrote:
> if you run
>
> [...]
>
> It's written Calculate Linux Desktop 17.12 !
>
> Calculat... -
- Good info! Thanks much guys!
-
- if you run...
-
- What exactly was the cl-update done (new release), nothing. Plasma is still an old version, a problem with the kernel...
-
- I did the downgrade kernel to version 4.9.72.
With kernel 4.14.9 system write: attempt to unregistered parameter pr... -
- Hi,
Calculate Linux is a rolling release. So just simply run *cl-update* (Or Linux Updater GUI) and your system is u... -
- It's rolling release. You can mix testing packages and leave other more important packages in stable versions.
-
- Hi all,
I asked this on the email list but have gotten no responses (is it still an active list?)...
I'm using Ca... -
- yeh since the release of calculate Linux 17.12 and it uses 4.14.9 kernel i think the problem will be fixed quick or p...
-
- Very strange situation, kernel 4.9.72 is marked in Calculate (GUI porthole) yellow as unstable. Kernel 4.14.9 is mask...
12/31/2017
-
- dragan legic wrote:
> Kernel 4.14.8 is not available in Calculate, only 4.14.9 and 4.9.72, on kernel.org new kernel ... -
- Kernel 4.14.8 is not available in Calculate, only 4.14.9 and 4.9.72, on kernel.org new kernel iz 4.14.10 and 4.9.73
-
- Tomasz Kaczmarczyk wrote:
> So calc devs pushed 4.14.9 when It was stable, most users has download it, but later had... -
- If something breaks after update you can mask newer packages version, and use previous one until It will be fixed. Fo...
-
- Adrien Daugabel wrote:
> Hi !
>
> I wrote an article on my website (in french of course) : https://www.linuxtrick... -
- So calc devs pushed 4.14.19 when It was stable, most users has download it, but later had been masked due to spotted ...
-
- was chatting on #gentoo about this problem and one of the people there saying the 4.14.9 kernel has problems and has ...
12/30/2017
-
- I update Calculate KDE to new version and new kernel 4.14.9, reboot and system write: *attempt to unregistered parame...
-
06:57 pm General: RE: which Virtualbox to install?
- [quote]calculate ~ # usermod -G vboxusers -a guest
usermod: Gruppe »vboxusers« existiert nicht.
calculate ~ # [/quo...
12/29/2017
-
- any word on how to solve my problem? i just tested on my laptop and boots the kernel fine its just my PC with amdgpu ...
-
- Where is update to Calculate plasma 5. I have absolute kernel 4.9.67-calculate. New aviable kernel is 4.14.9
-
06:37 am Networking and Wireless: Texas Instruments CC1120 module does not receive upon software upgrade
- I am using this development board by Texas Instruments with a CC1120 module(datasheet: http://www.kynix.com/uploadfil...
12/28/2017
-
- video card is: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev e1)
the message on screen is ... -
- What is your video card? What message does it write on the screen?
-
- same result locks up when it should be booting
-
- And with the 4.14.9 kernel ?
When the boot block ? -
- Im still unable to boot Linux 4.14.8-calculate default kernel, im booting on Linux calculate 4.9.34-calculate. i have...
12/26/2017
-
09:45 pm Calculate Utilities: RE: Building Your Own Gentoo-Based Linux System - overlay missing assemble a...
- That's almost what I ended up doing :)
I tried with addition of https://www.hetzner.com/storage-box that has Samba... -
- and yes this is only happening when there are at least two lines of subtitle. i tried to open this subtitle in gaupol...
-
- i don't know where to put this so i put it here simply because i am using KDE and smplayer. so here is the problem. s...
12/25/2017
-
- I just made a YouTube Video, the final fix.
https://youtu.be/HB0zKmZmpsI
First I made a YouTube video called wo... -
- I am and I still get the COM error :-(
-
- You have to be member of vboxusers group.
12/24/2017
-
- here is a image of what happens
!http://i63.tinypic.com/2dt0kk9.jpg! -
- ran the updater and no updates available and still not booting 4.14.8 looks like its going to boot then freezes. here...
-
- If you still have this problem, recent update (cl-update) is fixing grub config for 4.14.8.
-
- Hi Aleksandar,
You can install Gentoo, then download and unpack the CL into a free partition. -
- Hi Brad,
Apparently at this point the mirror was updating and the checksum of the packages did not match. It is en... -
- Tomasz Kaczmarczyk wrote:
> Brad Heffernan wrote:
> > Tomasz Kaczmarczyk wrote:
> > > Alexander Tratsevskiy wrote:... -
- i went into advanced menu entry and booted on the 4.9.23 kernel and that boots fine with no editing needed :)
-
- Brad Heffernan wrote:
> Tomasz Kaczmarczyk wrote:
> > Alexander Tratsevskiy wrote:
> > > Hi Tomasz,
> > > You can...
12/23/2017
-
- Tomasz Kaczmarczyk wrote:
> Alexander Tratsevskiy wrote:
> > Hi Tomasz,
> > You can start the system with a new ke... -
- Alexander Tratsevskiy wrote:
> Hi Tomasz,
> You can start the system with a new kernel *if you remove the 'elevator... -
08:52 pm FR : Discussions: RE: Changement de session figer sous MATE
- Salut Adrien, aucun changement.
J'ai essayer de différente façon:
nvidia.modeset=0
nvidia nomodeset
nvidia-dkm.mo... -
- Hi Tomasz,
You can start the system with a new kernel if you remove the 'elevator=..' parameter in the Grub. An upda... -
- i have been getting same thing hangs after grub on ...
-
- I'm not sure if that today's kernel upgrade 4.9.67 -> 4.14.8 on cl-update did this, but grub hangs on that first scr...
-
- Salut,
alors si c'est modset qui pose soucis, essayer d'ajouter l'option nomodset à GRUB pour désactiver la foncti... -
- Perhaps I'm asking the wrong question :)
Basically I'm in "catch 22" situation :|
I don't have physical acces... -
- Mine seems to work fine as root, but that is not how i want to use my Virtual-Box, i want to use it as normal user th...
-
- Ok Solved it still had my vpn active, but ran into another problem done an update and after a reboot got stuck on the...
-
- "An update to version 5.2.2 is being prepared. It will be possible to try it."
I had no issues running virtualbox,... -
- want to try out the i3wm with xfce4 looks pretty easy to do but on installation i am getting this
!http://i65.tiny...
Also available in: Atom