Activity
From 08/21/2010 to 09/19/2010
09/10/2010
-
07:20 am Calculate Linux Desktop MATE: RE: mounting dvd and usb on 10.9 gnome SOLVED
- Thanks Alexey,
I emerged k9copy and now I can play DVD's with VLC or smplayer.
They don't auto mount to the desktop...
09/09/2010
-
04:44 pm Calculate Linux Desktop MATE: RE: mounting dvd and usb on 10.9 gnome
- You have an encrypted dvd disk
http://forum.videohelp.com/threads/238279-DVD-Decrypter-for-Linux
http://www.bunkus.... -
- I emerged smplayer and libdvdread
dvd is not auto mounted but smplayer can find the video file and when I hit play
... -
- Use media-video/smplayer
DVD disk must be mounted without a team when inserting the drive. -
- Yes I was using an audio cd but now I tried a commercial dvd video (not home made)
I put the dvd in and ran the comm... -
- You are using an audio CD?
Try to run with another CD or DVD disc. -
- #mount /dev/cdrom /mnt/cdrom (disc is inserted)
mount: block device /dev/sr0 is write-protected, mounting read-on... -
- Show output when you run (the disc must be inserted)....
-
- Alexey,
mount -t iso9660 -o ro /dev/cdrom /media/cdrom
mount: mount point /media/cdrom does not exist
I have ...
09/08/2010
-
- root user can mount the drive?
09/06/2010
-
- Alexey,
I already did this and it makes no difference to mounting cdrom.
Thanks -
- Add user to the following groups if they are not in the output of execute command 'id'
http://www.calculate-linux....
09/04/2010
-
11:34 pm General: RE: Install grub to partition
- I tried it but the 10.9 beta installer does not recognize the --mbr=off option nor does it recognize --set-mbr=off as...
-
- hi, how do I mount my dvd drive and usb's in 10.9
I have changed permissions in cdrom to user and the dvd is recogni...
09/02/2010
-
- Yes
that worked Mike,
I wonder what the problem was.Maybe something for devs to look at if anyone else has same pro... -
01:19 pm Calculate Linux Desktop MATE: RE: 10.9 installer 32bit Gnome
- You can install system after update on livecd the calculate-install package:...
-
10:06 am General: RE: offline installation
- If you use a specific set of software, you can change the composition of programs ISO-image, using the "interactive a...
09/01/2010
-
10:42 pm General: RE: offline installation
- Yes, but I mean the rest of required packages. I need to install Ogre, CEGUI, a lot of development packages, latests...
-
- To install Calculate Linux Internet is not needed.
-
- Thanks for your reply. I will give it a try. I did some along the lines with --set-mbr=off but cl-install did not lik...
-
- I want to install CLDX on my home PC, without internet connection. In Gentoo, I have a method to get the packages, co...
-
- Reinstalled with cl-install -d /dev/sda1:/boot:reiserfs -w /dev/sda2 -d /dev/sda3:/:reiserfs -d /dev/sda4:/home
and ... -
- Realy strange.
Please install system by command... -
- Sync portages and update @calculate-install@ package:...
-
- I entered /dev/sdb2
also just sdb2 as you said
Both times it said it was not a valid root device.
I also tried /... -
- In string ...
-
- Hi Mike
what do you mean /dev/sdb3 or sdb3
I tried to install again on another sata drive with the partitions
sd... -
- Try enter for the answer on message ...
-
- thanks again Mike
I tried this too.
cl-install -d /dev/sda1:/boot:reiserfs -w /dev/sda2 -d /dev/sda3:/:reiserfs -d ...
08/31/2010
-
- I would like to install Calculate CLDG 10.9 beta 1 to a partiton. I would also like to install grub to the partition ...
-
- Did you try Safe mode in grub?
-
- try use reiserfs filesystem:...
-
- tried this
cl-install -d /dev/sda1:/boot:ext4 -w /dev/sda2 -d /dev/sda3:/:ext4 -d /dev/sda4:/home:ext4
All went... -
- http://paste.pocoo.org/show/256634/
I will try the rest of your instructions in the morning.
Thanks for your pati... -
- Do you try load Safemode in grub? (necessarily!)
Please perform this command, and get link. (in livecd system)
<pre... -
- http://paste.pocoo.org/show/256625/
-
- Please, perform...
-
- Ok, the command gave me a very long list of variables.
Anything special to look for?
Thanks -
- Please perform this command from livecd (root user).
-
- Do you perform 'cl-install -v' from livecd?
No, from the shell root prompt just after the error message.
"please ... -
- Do you perform @'cl-install -v'@ from livecd?
-
- ...
-
- Show the output of...
-
- I have no USB storage devices connected
and no other drives.
I tried another distro on these partitions and the /ro... -
- Try disabling USB additional storage devices.
Try disabling any other drives.
reboot -
- Hi Alexander,
Thanks for your reply.
I created 4 partitions with fdisk /dev/sda in the terminal.
rebooted
install...
08/30/2010
-
07:45 pm General: RE: a couple questions...
- Alexander Tratsevskiy wrote:
> Hi David,
>
> Nouveau driver is a beta version was not included, but we plan to in... -
- Contact with what options you have installed Calculate Linux.
-
- Hi David,
Nouveau driver is a beta version was not included, but we plan to include in release 10.9. Support for p...
08/29/2010
-
- With the new installer I have set 4 partitions on /dev/sda
1. /boot 2. swap 3. / 4. /home
install goes perfectly ...
08/27/2010
-
- Hi, I am a distro hopper, and just wanted to know if calculate uses pulse audio, and also if it uses the nouveau 3d d...
Also available in: Atom