LSI-tw_cli

USE OF LSI DOCUMENTATION AND SOFTWARE DOWNLOADS IS SUBJECT TO THIS AGREEMENT

IMPORTANT - READ CAREFULLY: This Software License Agreement ("SLA") is a legal agreement between 
you (either an individual or a single entity) and LSI Corporation ("LSI") for the LSI Licensed 
Software identified herein and licensed herein, which includes computer software and may include 
associated media, printed materials, and "online" or electronic documentation ("LICENSED 
SOFTWARE"). By installing, copying, or otherwise using the LICENSED SOFTWARE, you agree to be bound 
by the terms of this SLA. If you do not agree to the terms of this SLA, you may not install, copy 
or use the LICENSED SOFTWARE. The LICENSED SOFTWARE is licensed, not sold.

NOW THEREFORE, in consideration of the foregoing and the mutual promises and covenants contained in 
this SLA (also referred to as "Agreement"), the parties hereby agree as follows:

1. Definitions

 1.1. "Authorized Use for LSI Source Code" means use of the LSI Source Code solely for the purpose 
of internally developing, modifying, integrating and testing Licensee's Products to interface with 
LSI Devices authorized for such integration, and for no other use or purpose.
 1.2. "Authorized Use for LSI Binary Code" means use of the LSI Binary Code solely for the purpose 
of internal evaluation or developing, integrating, testing and use of Licensee's Products to 
interface with LSI Devices and for no other application, use or purpose.
 1.3. "Authorized Use for LSI Internal Code" means use of the LSI Internal Use Code solely for the 
purpose of internally developing, modifying, integrating and testing Licensee's Products to 
interface with LSI Devices authorized for such integration, and for no other use or purpose.
 1.4. "Explanatory Materials" means explanatory and informational materials or documentation 
concerning the LSI Licensed Code, in printed or electronic format, including without limitation, 
manuals, descriptions, user and/or installation instructions, diagrams, printouts, listings, 
flowcharts, and training materials, contained on visual media such as paper or photographic film, 
or on other physical storage media in machine-readable form. Explanatory Materials do not include 
any code.
 1.5. "LSI Licensed Code" means collectively all the software programs which are owned or 
distributed by LSI and licensed to Licensee via the LSI Download Center through acceptance of this 
Agreement. The LSI Licensed Code is specifically referenced individually in this Agreement as LSI 
Source Code, LSI Binary Code, or LSI Internal Use Code.
 1.6. "Licensee's Products" means the hardware and software (and related Licensee documentation) 
that will be developed or modified by or for Licensee utilizing the LSI Licensed Code for the 
purpose of interfacing or being used with LSI Devices.
 1.7. "Updates" means maintenance releases, bug fixes, errata or other corrections, and minor 
improvements or modifications to the LSI Licensed Code which may be provided by LSI to Licensee 
from time to time at LSI's sole discretion. LSI is under no obligation to provide Updates or 
provide support and maintenance services to Licensee Subsequent Users.
 1.8. "New Version" means significant changes, modifications, enhancements, and/or functional 
improvements to the LSI Licensed Code. New Versions are made and generally distributed solely at 
the discretion of LSI. Licensee must use the latest New Version of LSI Licensed Code that is 
available. LSI is under no obligation to port any development work from one version to the latest 
New Version of LSI Licensed Code.
 1.9. "LSI Devices" means those LSI products intended for use with the LSI Licensed Code and 
purchased from LSI or its agents.
 1.10. "Derivative Works" means: (a) for copyrightable or copyrighted material, any translation 
(including translation into other computer languages), port, modification, correction, addition, 
extension, upgrade, improvement, compilation, abridgment or other form in which an existing work 
may be recast, transformed or adapted; (b) for patentable or patented material, any improvement 
thereon; and (c) for material which is protected by trade secret, any new material derived from 
such existing trade secret material, including new material which may be protected by copyright, 
patent and/or trade secret.
 1.11. "Intellectual Property Rights" means (by whatever name or term known or designated) 
copyrights, trade secrets, patents, moral rights and any other intellectual and industrial property 
and proprietary rights (excluding trademarks) including registrations, applications, renewals and 
extensions of such rights anywhere in the world.
 1.12. "LSI Binary Code" means the software programs provided for distribution at the LSI Download 
Center, in binary form, any other machine readable materials, including, but not limited to, 
libraries, source files, header files, and data files, any Updates and New Versions provided by 
LSI.
 1.13. "LSI Source Code" means the software programs provided for distribution at the LSI Download 
Center, in source form including, but not limited to, libraries, source files, header files, and 
data files, and Updates and New Versions provided by LSI.
 1.14. "LSI Internal Use Code" means the software programs provided for distribution at the LSI 
Download Center, in source code or object code format including, but not limited to, libraries, 
source files, header files, and data files, and Updates and New Versions provided by LSI that are 
only for Licensee's internal use.
 1.15. "JRE Code" mean Oracle Corporation's JAVA SE Runtime Environment Code.
 1.16. "Subsequent User" means any user subsequent to Licensee, including but not limited to, all 
Licensee customers, resellers, end users, and OEMs.
 1.17 “Taxes" shall mean all taxes, levies, imposts, duties, fines or other charges of whatsoever 
nature however imposed by any country or any subdivision or authority thereof in any way connected 
with this Agreement or any instrument or agreement required hereunder, and all interest, penalties 
or similar liabilities with respect thereto, except such taxes as are imposed on or measured by a 
party's net income or property.
2. Grant of Rights

2.1 LSI Binary Code. Subject to the terms of this Agreement, LSI grants to Licensee a 
non-exclusive, world-wide, revocable (for breach in accordance with Section 7), non-transferable 
limited license, without the right to sublicense except as expressly provided herein, solely to:

 (a) Use the LSI Binary Code and related Explanatory Materials solely for the Authorized Use for 
Binary Code and only with LSI Devices
 (b) Make copies of the LSI Binary Code and related Explanatory Materials to support the Authorized 
Use for Binary Code and for archival and backup purposes in support of the Authorized Use for 
Binary Code only with LSI Devices;
  (c) Distribute the LSI Binary Code as incorporated in Licensee's Products or for use with LSI 
Devices to its Subsequent Users;
 (d) Distribute the Explanatory Materials related to LSI Binary Code only for use with LSI Devices;
 (e) Sublicense the rights provided in paragraphs (a) and (b) above in accordance with the terms 
provided in this Agreement to contract manufacturers ("CMs") and/or original design manufacturers 
("ODMs"), in each case meeting the requirements of Section 3.1(d) below for the purpose of 
manufacturing Licensee's Products; and (f) Sublicense the rights provided in paragraphs (b) and (c) 
in accordance with the terms provided in this Agreement to Subsequent Users who are not end users 
for the purpose of distributing and supporting Licensee's Product.
2.2 LSI Source Code. Subject to the terms of this Agreement, LSI grants to Licensee a 
non-exclusive, worldwide, revocable (for breach in accordance with Section 7), non-transferable 
limited license, without the right to sublicense except as expressly provided herein, solely to:

 (a) Use the LSI Source Code and related Explanatory Materials solely for the Authorized Use for 
Source Code and only with LSI Devices;
 (b) Make copies of the LSI Source Code and related Explanatory Material to support the Authorized 
Use for Source Code only and for archival and backup purposes in support of the Authorized use for 
Source Code only with LSI Devices;
 (c) Modify and prepare Derivative Works of the LSI Source Code for the Authorized Use for LSI 
Source Code and only for use with LSI Devices;
 (d) Distribute the binary form only of any authorized Derivative Work of the LSI Source Code 
("Licensee Binary Derivative") and necessary portions of the related Explanatory Materials only for 
use with LSI Devices; and
 (e) Sublicense the rights granted in paragraph (d) above in accordance with the terms provided in 
this Agreement to Subsequent Users who are not end users for the purpose of distributing and 
supporting Licensee's Product.
2.3 LSI Internal Use Code. Subject to the terms of this Agreement, LSI grants to Licensee a 
non-exclusive, worldwide, revocable (for breach in accordance with Section 7), non-transferable 
limited license, without the right to sublicense or distribute, solely to:

 (a) Use the LSI Internal Use Code and related Explanatory Materials solely for the Authorized Use 
for Internal Code and only with LSI Devices; and
 (b) Make copies of the LSI Internal Use Code and related Explanatory Materials to support the 
Authorized Use for Internal Code only and for archival and backup purposes in support of the 
Authorized use for Internal Code only with LSI Devices.
2.4 Without limiting Section 4, Licensee may exercise the foregoing rights directly and/or 
indirectly through its employees and contractors, who are bound by terms at least as restrictive as 
this Agreement.

3. License Restrictions

3.1. LSI Binary Code. The Licenses granted in Section 2.1 for LSI Binary Code and related 
Explanatory Materials are subject to the following restrictions:

 (a) Licensee shall not use the LSI Binary Code and related Explanatory Materials for any purpose 
other than as expressly provided in Article 2;
 (b) Licensee shall reproduce all copyright notices and other proprietary markings or legends 
contained within or on the LSI Binary Code and related Explanatory Materials on any copies it 
makes; and
 (c) Licensee shall not distribute or disclose the LSI Binary Code and related Explanatory 
Materials except pursuant to an agreement with terms at least as protective of LSI's Binary Code as 
the terms of this Agreement. Licensee shall not, and shall not allow its Subsequent Users to, 
disassemble, de-compile, or reverse engineer the LSI Binary Code.
 (d) Licensee may grant the sublicense set forth in Section 2.1(e) to its CMs and ODMs, provided 
that each such CM and ODM agrees to abide by the terms and conditions of this Agreement and 
Licensee shall remain responsible for any failure by its CMs and ODM to comply with the terms and 
conditions of this Agreement.
3.2. LSI Source Code. The Licenses granted in Section 2.2 for LSI Source Code and related 
Explanatory Materials are subject to the following restrictions:

 (a) Licensee shall not use the LSI Source Code and related Explanatory Materials for any purpose 
other than as expressly provided in Article 2;
 (b) Licensee shall reproduce all copyright notices and other proprietary markings or legends 
contained within or on the LSI Source Code and related Explanatory Materials on any copies it 
makes;
 (c) Licensee shall not distribute or disclose any LSI Source Code and related Explanatory 
Materials to any Subsequent Users or third parties, without the express written consent of LSI;
 (d) Licensee shall not knowingly infringe upon the intellectual property rights of any third party 
when making Derivative Works to the LSI Source Code;
 (e) Licensee shall not disassemble, reverse-engineer, or decompile the LSI Source Code, except for 
making authorized Derivative Works; and
 (f) Licensee shall not distribute or disclose the Licensee Binary Derivative except pursuant to an 
agreement with terms at least as protective as those in this Agreement protecting LSI's Binary 
Code. Licensee shall not, and shall not allow its Subsequent Users to, disassemble, de-compile, or 
reverse engineer the Licensee Binary Derivative.
3.3. LSI Internal Use Code. The Licenses granted in Section 2.3 for LSI Internal Use Code and 
related Explanatory Materials are subject to the following restrictions:

 (a) Licensee shall not use the LSI Internal Use Code and related Explanatory Materials for any 
purpose other than as expressly provided in Article 2;
 (b) Licensee shall reproduce all copyright notices and other proprietary markings or legends 
contained within or on the LSI Internal Use Code and related Explanatory Materials on any copies it 
makes;
 (c) Licensee shall not distribute or disclose any LSI Internal Use Code and related Explanatory 
Materials to any Subsequent Users or third parties, without the express written consent of LSI; and
 (d) Licensee shall not disassemble, reverse-engineer, or decompile the LSI Internal Use Code.
3.4. Derivative Works of LSI Source Code Made by Licensee. Subject to LSI's rights in the 
underlying LSI Source Code, Licensee shall own all right, title and interest in and to the 
Derivative Works (both binary and source format) it makes from LSI Source Code, provided that such 
Derivative Works are not made in breach of this Agreement. Licensee shall not be required to 
disclose its Derivative Works of the LSI Source Code to LSI. LSI shall have no obligations 
whatsoever to support, maintain, contribute to, or provide Updates, New Versions or any 
modifications to Licensee Derivative Works of the LSI Source Code and shall have no liability 
whatsoever for such Derivative Works. In the event Licensee requests LSI's input regarding Licensee 
Derivative Works of LSI Source Code and plans to disclose such Derivative Works to LSI, a separate 
written agreement shall first be executed by the parties.

3.5. LSI Derivative Works. Nothing contained herein shall prevent LSI from creating any Derivative 
Works of its LSI Source Code at any time. Licensee further agrees that LSI may independently create 
a Derivative Work similar to or in competition with the Licensee Derivative Work of the LSI Source 
Code and may use that Derivative Work for any purpose. Licensee grants LSI a Covenant Not to Sue 
for any independently developed Derivative Works created by LSI for its own LSI Source Code that 
Licensee may believe or claim infringes on any of Licensee's Intellectual Property Rights relating 
to the Licensee Derivative Works of the LSI Source Code.

3.6. U.S. Government Subsequent Users. All LSI Licensed Code and Explanatory Materials qualify as 
"commercial items," as that term is defined at 48 C.F.R. 2.101, consisting of "commercial computer 
software" and "commercial computer software documentation" as such terms are used in 48 C.F.R. 
12.212. Consistent with 48 CFR 52.227-19, 48 C.F.R.12.212 and 48 C.F.R. 227.7202-1 through 
227.7202-4, Licensee will provide to U.S. Government end users such LSI Binary Code with only those 
rights set forth herein that apply to non-governmental end users. Use of such LSI Binary Code 
constitutes agreement by the government entity that the computer software and computer software 
documentation is commercial and constitutes acceptance of the rights and restrictions herein.

3.7. No Implied Licenses. Except for the express and limited licenses granted herein for specific 
purposes, no rights or licenses are granted by LSI under this Agreement, by implication, 
inducement, estoppel or otherwise with respect to any proprietary information or to any patents, 
copyrights, trade secrets, trademarks, maskworks or other Intellectual Property Rights owned or 
controlled by LSI. Any further licenses must be express, in writing and signed by an authorized 
representative of LSI.

3.8. Injunctive Relief. In the event of a breach by Licensee of this Section 2 or 3, LSI shall be 
entitled to applicable injunctive relief and to all remedies available in equity and law to prevent 
Licensee from disassembling, de-compiling, reverse engineering, disclosing or using the LSI 
Licensed Code in whole or in part.

3.9. LSI Licensed Code Containing JRE. Certain LSI Licensed Code may contain JRE. Use of the JRE is 
restricted by JRE licensing terms to General Purpose Desktop Computers and Servers, as defined 
below. Licensee may seek its own license for the JRE directly with the owner, if it deems 
necessary. "General Purposes Desktop Computers and Servers" under JRE licensing terms is defined as 
"computers, including desktop, laptop and tablet computers, or servers, used for general computing 
functions under end user control (such as but not specifically limited to email, general purpose 
Internet browsing and office suite productivity tools)". The full terms and conditions for use of 
the JRE are available at: http://www.oracle.com/technetwork/java/javase/terms/license/index.html.

3.10. Notwithstanding anything to the contrary in this Agreement, to the extent there is a conflict 
between this Agreement’s provisions and any applicable license to open source technology, the 
provisions of the open source license shall take precedence and be followed, but only to the 
minimum extent reasonably necessary to comply with the applicable open source license.

4. Confidentiality

 4.1 Licensee agrees to limit access to the LSI Licensed Code and Explanatory Materials to 
employees and contractors of Licensee (which may include, without limitation, contractors retained 
by Licensee to maintain or modify the LSI Licensed Code and Explanatory Materials on behalf of 
Licensee) having a need to access or know the LSI Licensed Code and Explanatory Materials and who 
have executed nondisclosure agreements with Licensee obligating them to maintain the 
confidentiality of the LSI Licensed Code and Explanatory Materials.
 4.2 Licensee shall hold in confidence the LSI Licensed Code and Explanatory Materials as LSI's 
confidential information ("Confidential Information") and shall use the LSI Code and Explanatory 
Materials only as expressly provided in Section 2, and protect the confidentiality of such 
Confidential Information with the same degree of care as Licensee uses to protect its own 
confidential or proprietary information of great commercial value, but in no event less than 
reasonable care and for no less than three (3) years from the date of disclosure.
 4.3 Licensee agrees to notify LSI immediately after Licensee becomes aware of any suspected misuse 
or unauthorized disclosure of any Confidential Information. The obligations of confidentiality 
imposed on Licensee under this Section 4 shall not apply or shall cease to apply to any of such 
Confidential Information that Licensee clearly establishes: (i) was already rightfully in the 
possession of Licensee at the time of disclosure as evidenced by records of Licensee; (ii) is or 
becomes publicly available through no act or omission of Licensee; (iii) is rightfully received by 
Licensee from a third party without an obligation of confidentiality; (iv) is independently 
developed by Licensee's employees or contractors without use of or access to the information; or 
(v) is approved for unrestricted disclosure in writing by an authorized representative of LSI. LSI 
makes no warranty as to the accuracy of any Confidential Information, which is furnished "AS IS" 
with all faults.
5. Ownership of Code by LSI, Fees, and Taxes

 5.1 LSI (or its licensors) reserve all right, title, ownership and interest in and to the LSI 
Licensed Code and Explanatory Materials existing prior to and after the Effective Date of this 
Agreement, or created or generated by LSI (or its licensors) at any time, subject to any licenses 
granted. LSI (or its licensors) reserves all right, title, ownership and interest in and to any 
Derivative Works it creates at any time to the LSI Licensed Code and Explanatory Materials, subject 
to any licenses granted.
 5.2 Fees and Taxes. No fees are due in connection with this Agreement unless separately specified 
by LSI. If any such fees are separately specified in writing, the following applies:
 5.2.1 Payment is due by Licensee upon download, at time of purchase, or no later than within 
thirty (30) days of date of LSI invoice therefore, as designated by LSI All payments shall be made 
in U.S. currency unless otherwise agreed. If at any time, Licensee is delinquent in the payment of 
any invoice, or is otherwise in breach of this Agreement, LSI may, at its discretion, and without 
prejudice to its other rights, withhold delivery (including partial delivery) of any order or may, 
at its option, require Licensee to prepay for further deliveries. Any sum not paid by Licensee, 
when due, shall bear interest until paid at a rate of 1.5% per month (18% per annum) or the maximum 
rate permitted by law, whichever is less.
 5.2.2 All payments or reimbursements due under this Agreement and any instrument or agreement 
required hereunder shall be made free and clear and without deduction for any and all present and 
future Taxes. Payments due to LSI under this Agreement and any instrument or agreement required 
hereunder shall be increased so that amounts received by LSI, after provisions for Taxes and all 
Taxes on such increase, will be equal to the amounts required under this Agreement and any 
instrument or agreement required hereunder if no Taxes were due on such payments.
 5.2.3 The Licensee shall indemnify LSI for the full amount of Taxes attributable to the provision 
of products or services under this Agreement, and any liabilities (including penalties, interest 
and expenses) arising from such Taxes, within thirty (30) days from any written demand by LSI. The 
Licensee shall provide evidence that all applicable Taxes have been paid to the appropriate taxing 
authority by delivering to LSI receipts or notarized copies thereof within thirty (30) days after 
the due date for such tax payments.
 5.2.4 Without prejudice to the survival of any other Agreement of Licensee hereunder, the 
obligations of Licensee contained in this section shall survive the payment in full of all payments 
hereunder.
6. Support

 (a) LSI may provide the following support services for the LSI Licensed Code to the extent LSI 
deems reasonable: Updates if and when released and errata in LSI's sole discretion. LSI shall not 
be responsible for any other support or maintenance of LSI Licensed Code to Licensee or its 
Subsequent Users, unless otherwise agreed to in writing. LSI is under no obligation to provide 
support services and may discontinue support services at any time. LSI will not provide support for 
modified LSI Licensed Code or Licensee's Derivative Works of the LSI Source Code.
 (b) Any Updates to the LSI Licensed Code provided by LSI (which shall only be provided by LSI in 
its sole discretion) shall be governed by the terms of this Agreement.
 (c) If Licensee finds what Licensee considers an error in the LSI Licensed Code, Licensee will 
notify LSI so that LSI can, in its sole discretion, make corrections to the LSI Licensed Code or to 
future revisions of the LSI Licensed Code.
7. Term and Termination

 7.1 Term. The term of this Agreement is five (5) years from the Effective Date, subject to renewal 
upon mutual agreement of the parties.
 7.2 Termination for Breach. If Licensee breaches any material provision of this Agreement, LSI 
shall have the right to terminate this Agreement, including all licenses granted hereunder, in 
addition to any and all other remedies available at law or equity, unless Licensee cures such 
breach within sixty (60) days ("Cure Period") after receiving written notice of the breach by LSI. 
Licensee shall make best efforts to cure the material breach in the least amount of time possible 
within the Cure Period.
 7.3 Insolvency. If either party: (a) becomes substantially insolvent; (b) makes an assignment for 
the benefit of creditors; (c) files or has filed against it a petition in bankruptcy or seeking 
reorganization; (d) has a receiver appointed; or (e) institutes any proceedings for liquidation or 
winding up or have such proceedings instituted against it; then the other party may, in addition to 
other rights and remedies it may have, terminate this Agreement immediately by written notice.
 7.4 Consequences. Upon termination or expiration of this Agreement for any reason whatsoever, the 
licenses, rights, and covenants granted hereunder and any obligations imposed hereunder shall cease 
except as otherwise expressly set forth herein as surviving termination or expiration.
 7.5 Return of Confidential Information. Upon expiration or termination of this Agreement for any 
reason or upon written request by LSI, Licensee agrees to promptly return to LSI or, at LSI's 
request, destroy and certify by an officer of Licensee in writing the destruction of, all LSI 
Confidential Information furnished to Licensee, including all LSI Licensed Code and Explanatory 
Materials.
 7.6 Survival of Licenses. Any LSI Licensed Code and Explanatory Materials distributed prior to the 
effective date of any termination, expiration, breach, or cancellation of this Agreement, shall 
remain licensed (including any LSI Licensed Code in inventory, manufactured, or work in progress 
with Licensee products) under the terms of this Agreement. Notwithstanding the foregoing, Licensee 
may retain an archival copy of portions of the LSI Confidential Information, including LSI Licensed 
Code and Explanatory Materials, necessary for Licensee to provide ongoing technical support to 
Subsequent Users using the LSI Licensed Code ("Archival Materials") after termination, expiration 
or cancellation of this Agreement. Such Archival Materials may not be used for any other purpose 
without the written consent from LSI. Licensee shall keep such Archival Materials confidential for 
an additional five (5) years from the date of termination, expiration , or cancellation of this 
Agreement, regardless of when the LSI Confidential Information was disclosed.
 7.7 Survival. In the event of expiration or termination of this Agreement for any reason, the 
following sections of this Agreement shall survive: 1, 3, 5, 7, 8, 9, 8 and 10. Termination will 
not prejudice either party to require performance of any obligation due at the time of termination. 
All end user licenses in effect and in compliance with the Agreement prior to effective termination 
or expiration shall survive and continue in full force and effect in accordance with their terms 
and Licensee may continue to perform its obligations thereunder, including support obligations.
8. Disclaimer of All Warranties

 8.1 THE PARTIES AGREE THAT LSI FURNISHES THE LSI LICENSED CODE AND EXPLANATORY MATERIALS TO 
LICENSEE "AS IS," UNSUPPORTED, WITHOUT WARRANTY OF ANY KIND. LSI DISCLAIMS ALL WARRANTIES, EXPRESS 
OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE 
AND NON-INFRINGEMENT, INCLUDING ANY THAT MAY ARISE FROM A COURSE OF PERFORMANCE, A COURSE OF 
DEALING OR TRADE USAGE. LSI SHALL NOT BE LIABLE FOR ANY ERROR, OMISSION, DEFECT, DEFICIENCY, OR 
NONCONFORMITY IN THE LSI LICENSED CODE OR EXPLANATORY MATERIALS. LSI MAKES NO WARRANTY OR 
REPRESENTATION THAT THE LSI LICENSED CODE OR EXPLANATORY MATERIALS WILL MEET LICENSEE'S 
REQUIREMENTS OR WILL WORK IN COMBINATION WITH ANY HARDWARE OR SOFTWARE APPLICATION.
 8.2 LSI DISCLAIMS ANY AND ALL LIABILITY IN CONNECTION WITH LICENSEE'S USE OF THE LSI LICENSED CODE 
IN ANY MEDICAL, NUCLEAR, AVIATION, NAVIGATION, MILITARY, OR OTHER HIGH RISK DEVICE OR APPLICATION. 
LICENSEE REPRESENTS AND WARRANTS THAT IT WILL NOT USE THE LICENSED LSI CODE IN ANY MEDICAL, 
NUCLEAR, AVIATION, NAVIGATION, MILITARY, OR OTHER HIGH RISK DEVICE OR APPLICATION. LICENSEE SHALL 
INDEMNIFY, DEFEND, AND HOLD LSI HARMLESS AGAINST ANY LOSS, LIABILITY, OR DAMAGE OF ANY KIND THAT 
LSI INCURS IN CONNECTION WITH BREACH OF THE WARRANTY IN THIS SECTION 8.2.
 8.3 LSI DISCLAIMS ANY AND ALL LIABILITY IN CONNECTION WITH LICENSEE'S CREATION AND USE OF 
DERIVATIVE WORKS OF THE LSI SOURCE CODE. LICENSEE SHALL INDEMNIFY, DEFEND, AND HOLD LSI HARMLESS 
AGAINST ANY LOSS, LIABILITY, OR DAMAGE OF ANY KIND THAT LSI INCURS IN CONNECTION WITH LICENSEE'S 
DERIVATIVE WORKS OF LSI SOURCE CODE.
9. Limitation of Liability

 IN NO EVENT SHALL LSI, ITS EMPLOYEES, AFFILIATES ORSUPPLIERS BE LIABLE FOR ANY LOST PROFITS, 
REVENUE, SALES OR DATA OR COSTS OF PROCURE OF SUBTITUTE GOODS OR SERVICES, INTERRUPTION, LOSS OF 
BUSINESS INFORMATION OR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, ECONOMIC OR 
PUNITIVE DAMAGES, HOWEVER CAUSED, AND WHETHER ARISING UNDER CONTRACT, TORT, STRICT LIABILITY, 
NEGLIGENCE OR OTHER THEORY OF LIABILITY, ARISING OUT OF THE USE OR INABILTY TO USE THE LSI LICENSED 
CODE OR EXPLANATORY MATERIALS, EVEN IF LSI OR ITS EMPLOYEES, SUPPLIERS OR AFFILIATES ARE ADVISED OF 
THE POSSIBILTIY OF SUCH DAMAGES. IN THE EVENT THAT THE APPLICABLE JURISDICTION DOES NOT ALLOW THE 
EXCLUSION OR LIMITATION OF LIABILITY, BUT DOES ALLOW LIABILTY TO BE LIMITED, THE LIABILITY OF LSI, 
ITS EMPLOYEES, AFFILIATES, OR SUPPLIERS IN SUCH CASES, SHALL BE LIMITED TO $100 US DOLLARS.
10. General

 10.1 Assignment. Licensee shall not assign this Agreement or any of its rights or delegate any of 
its duties under this Agreement without the prior written consent of LSI. Subject to the foregoing, 
this Agreement will be binding upon, enforceable by, and inure to the benefit of the parties and 
their respective successors and assigns. Any attempted assignment in violation of this Section 10.1 
shall be null and void.
 10.2 Governing Law. This Agreement shall be construed and interpreted in accordance with the law 
of the State of California without reference to its conflicts of law principles.
 10.3 Exclusive Jurisdiction. All disputes arising out of or related to this Agreement will be 
subject to the exclusive jurisdiction and venue of the California state courts of Santa Clara 
County, California in United States District Court for the Northern District of California, and the 
parties consent to the personal and exclusive jurisdiction of these courts.
 10.4 Export Control. Licensee shall follow all export control laws and regulations relating to the 
LSI Licensed Code and Explanatory Materials. Licensee hereby acknowledges responsibility for 
compliance with all applicable US and local laws and regulations related to import and export and 
acknowledges and agrees that the LSI Licensed Code is subject to the U.S. Export Administration 
Regulations. Diversion contrary to U.S. law is prohibited. Licensee agrees that the LSI Licensed 
Code is being or will be acquired for, shipped, transferred, or re-exported, directly or 
indirectly, to prohibited or embargoed countries, nor be used for any prohibited end-use, such as 
nuclear activities, chemical/biological weapons, or missile projects, unless expressly authorized 
by the U.S. Government. Prohibited countries are set forth in the Supplement 1 to Part 740 of the 
U.S. Export Administration Regulations. Countries currently subject to U.S. embargo include: Cuba, 
Iran, N. Korea, Sudan and Syria. This list is subject to change without further notice from LSI 
Corporation and Licensee understands that compliance with the list as it exists in fact, is 
required. Licensee assumes sole responsibility for obtaining any/all licenses required for export 
or re-export. All ECCN and CCATS numbers and License Exception information are subject to change 
without notice. Modification in any way nullifies the classification. It is therefore your 
obligation as an exporter to verify such information and comply with the then currently applicable 
regulations. Any data provided by LSI is for informational purposes only. LSI Corporation makes no 
representation or warranty as to the accuracy or reliability of any classifications or numbers. Any 
use of such classifications or numbers by you is without recourse to LSI Corporation and is at your 
own risk. LSI Corporation is in no way responsible for any damages, whether direct, indirect, 
consequential, incidental or otherwise, suffered by you as a result of using or relying upon such 
classifications or numbers for any purpose whatsoever. Licensee agrees to consult the EAR, the 
Bureau of Industry and Security's Export Counseling Division, and other appropriate sources before 
distributing, importing, or using LSI products. You may request software classification information 
from LSI or view it at LSI.com. If requested, Customer agrees to sign written assurances and other 
export-related documents as may be required by LSI.
 10.5 Waiver. No failure or delay on the part of either party in the exercise of any right or 
privilege hereunder shall operate as a waiver thereof or of the exercise of any other right or 
privilege hereunder, nor shall any single or partial exercise of any such right or privilege 
preclude other or further exercise thereof or of any other right or privilege.
 10.6 Notice. Any notice or claim provided for herein to LSI shall be in writing and addressed as 
set forth below, and shall be given (i) by personal delivery, effective upon delivery, (ii) by 
first class mail, postage prepaid, addressed as set forth below, effective one (1) business day 
after proper deposit in the mail, or (iii) by facsimile directed to the facsimile number set forth 
below, but only if accompanied by mailing of a copy in accordance with (ii) above, effective as of 
the date of facsimile transmission.
 Vice President 
Global Commercial Law Group 
LSI Corporation 
1110 American Parkway, NE 
Room 12K-302 
Allentown, PA 18109 
Fax: (610) 712-1450
 10.7 Severability. If any term, condition, or provision of this Agreement, or portion of this 
Agreement, is found to be invalid, unlawful or unenforceable to any extent, the parties will 
endeavor in good faith to agree to such amendments that will preserve, as far as possible, the 
intentions expressed in this Agreement. Such invalid term, condition or provision will be severed 
from the remaining terms, conditions and provisions, which will continue to be valid and 
enforceable to the fullest extent permitted by law.
 10.8 Other Rights. Nothing contained in this Agreement shall be construed as conferring by 
implication, estoppel, or otherwise upon either party or any third party any license or other right 
except, solely as to the parties hereto, the rights expressly granted hereunder.
 10.9 Integration; Modification. This Agreement embodies the final, complete and exclusive 
statement of the terms agreed upon by the parties with respect to the subject matter hereof and 
supersedes any prior or contemporaneous representations, descriptions, courses of dealing, or 
agreements in regard to such subject matter. No amendment or modification of this Agreement shall 
be valid or binding upon the parties unless stated in writing and signed by an authorized 
representative of each party.
 10.10 Publicity. All publicity concerning this transaction referring to the other party shall 
require the other party's prior written approval which shall not be unreasonably withheld.
 10.11 Relationship of the Parties. The relationship of the parties hereto is that of independent 
contractors. Neither party, nor its agents or employees, shall be deemed to be the agent, employee, 
joint venture partner, partner or fiduciary of the other party. Neither party shall have the right 
to bind the other party, transact any business on behalf of or in the name of the other party, or 
incur any liability for or on behalf of the other party.


Packages

Thank you!