Активность
С 28.09.2015 по 27.10.2015
27.10.2015
-
21:52 Calculate Linux Scratch: Doesn't this have openbox on it?
- Why does it the boot to a command line? Shouldn't I be seeing openbox and not a command line?
-
04:56 General: Calculate Console Connection - Add the certificate to trusted
- Hi Calculaters,
Well, here I am again and *I am still experiencing unnecessary frustration* because the *documenta... -
- Hi Alexander,
I understand what you posted above but you have not explained the philosophy behind it.
Does Calc...
26.10.2015
-
20:27 General: RE: Update problem - CL 15.
- I have constantly received different errors for couple of days.
Yes,i have tried many times. They just fixed it thi... -
11:44 General: RE: dev-qt/qtcore-5.5.1 fails to compile
- May be wrong ebuild in @x-portage@ overlay? @dev-qt/qtcore-5.5.1::x-portage@
-
- Is correct @/etc/shadow@ file after update? File shouldn't be empty or contains less 10 strings.
-
- Do you use @radeon@ or @fglrx@ video driver?
-
- Did you try again execute "cl-update" after receiving "Reference 25 not found in repository.... /calculate/distros.gi...
-
- > I entered all but I don't know if that was the correct thing to do.
Yes, at this moment correctly support only *... -
09:26 General: RE: The problem update to Calculate 15th
- Not helping the Ctrl + Alt + F1.The problem is upgrading. It has to be settled.Developers cause problems with the upg...
-
09:21 General: RE: sudo vs su philosophy for Calculate/Gentoo?
- In Calculate Linux sudo is configured in Live USB. Once installed, you can get the right 'root' from the user using t...
-
- Hi Mickael,
It is better to perform the system upgrade (cl-update) before installing the new packages. -
- Hi Calculaters,
I have only been using Linux for 2 years now.
Whilst solving the problems I encountered with th... -
- I used the Xfce ISO.
-
06:00 General: RE: File Ownership after installation?
- I don't actually know the answer to that. What iso did you use? I can try to recreate the problem inside a VM.
-
- Thanks Antonio!
Well, this is almost ready to be marked as SOLVED but for the following question.
Why was the *... -
- Hi Calculaters,
Should I install the updates for Calculate Linux 15 before installing the Cinnamon desktop or shou... -
- Hi Calculaters,
Now that I've got my *sudo* problem solved, I have the following to be resolved.
After entering... -
- Ok, thanks to Antonio Hutsona I was able to get this part of my problems solved earlier and I will mark this topic as...
-
- Auto login does not matter. Did you try Ctrl+Alt+F1? Did you try the steps I listed?
25.10.2015
-
- When installing Calculate, I set to be automatic login.
-
- Nisu ti oni bas azurni po tom pitanju. Puno ces se nacekati. Distra je dobra, jedno vrijeme odlicno funkcionise a zat...
-
- >> What do you mean by the following?
> but sudo should be configured for this user
If you want use sudo command,... -
- Druže,hvala na ažurnosti. Gde su zvaničnici da nešto objave ?
Thanks buddy for your help. I hope that administrato... -
- So when you log in you get this screen with no icons correct? After hitting Ctrl+Alt+F1 did you log in to the system....
-
- The problem is part of the kernel 4.2.3. Signing up is automatic.
To Calculate the characteristic that the real prob... -
- *'{}' \*
The *'{}'* is like an "execute on everything in this set" its wrapped in quotes to protect the entries ... -
- Zemljace, ne vrsi update jer kasnije neces moci uci u sistem. Ja imam taj problem. Da bih izvrsio update, potrebno ti...
-
- *su* accepted the Root Password created during Installation.
What do you mean by the following?... -
- I am logged in as *mtbvfr*.
There are *home* directories for both *guest* and *mtbvfr*.
*man chown* is useless.... -
- Root password is password for root user. Sudo use user password, but sudo should be configured for this user. Try run...
-
- System should be correctly installed, no matter what you choose, if the installer did not display the error messages....
-
- Before logging, the picture appears with no icon. The system only restarts. I tried the Ctrl + Alt + F1, to no avail....
-
- When logged in are you logged in as guest or as a normal user? Do you see two home directories? One guest and one for...
-
04:39 General: RE: The problem update to Calculate 15th
- If you get to the splash screen and are stuck in a bootloop, chroot into the system http://www.funtoo.org/Installatio...
-
- Hello to all members of CL staff!
This has been a great Linux distro.
I hope that I will use it in the future.
...
24.10.2015
-
- !http://s9.postimg.org/ay8zzj6hb/Capture_Z.png!
To raise Calculate get this picture, without figures. -
- When installing Calculate, I made only a / (root) partition. Previously I installed Ubuntu 15.10. Calculate worked OK...
-
- gcc version 4.9.3
glibc version 2.21-r1
ERROR:
> /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.3/include/g++-v4/ext/con... -
- 4.9.3 and glibc is 2.21-r1, the stable packages, basically.
-
- Ill try. what version of gcc are you running?
-
- It compiled for me, using the default flags, so it's likely a perl/python bug, or something of that sort.
I recommen... -
- Glad I could help!!! Now I'm working on why dev-qt/qtcore-5.5.1 keeps failing to compile, I don't know C++ but I gues...
-
- Could be related to this: http://www.calculate-linux.org/boards/15/topics/30152
Tell me what your partition tabl... -
- When you execute the update, I can not get into the system.Three times I exercised install Calculate and then update....
-
- I can't believe I overlooked that. THANK YOU, it worked.
-
- I tried to answer you in IRC but I think you were gone by then. About two weeks ago I had a very very very long night...
-
- Used to have this. Fixed by setting layers.offmainthreadcomposition.enabled to false in about:config.
-
- Alright, so I've been using Calculate linux for a while with no issues whatsoever. Recently a broken glibc ebuild bro...
-
- During the installation I added a new User Account (*mtbvfr*) for myself and intended to delete the *guest* account a...
-
- So far my experience with the installation and configuration of Calculate 15 has been *TERRIBLE* to say the least. Th...
23.10.2015
-
- Mikhail Hiretsky wrote:
> Michael Holberton wrote:
>
> > How do you know when the Installation is finished?
>
... -
- You shouldn't select Boot disk. UEFI boot uses EFI partition.
-
- Michael Holberton wrote:
> How do you know when the Installation is finished?
You can run cl-console-gui and cl... -
- I can see that /boot/grub/grub.cfg has been created on the partition I chose for installation.
How can I check if ... -
- Hi Calculaters,
How do you know when the Installation is finished?
The following image is the last Screenshot I...
22.10.2015
-
- The following is what I see after selecting */dev/sda* as the *Boot disk*, checking the *UEFI boot* option and select...
-
- Below is an image of the Mount Points tab.
What choices should I make for the *Boot disk* section?
!GuiIinstall... -
- Mikhail Hiretsky wrote:
> Probably you select "Boot disk" parameter on tab "Mount points". Need to drop changes by p... -
- Probably you select "Boot disk" parameter on tab "Mount points". Need to drop changes by press on yellow arrow.
-
11:03 General: RE: Cinnamon Desktop - Which packages need to be installed?
- _Should that be /etc/init.d/xdm stop_
Yes sorry :D
_Currently, there is no ~/.xinitrc file. Does that matter?_
... -
- Try to execute <<PORTAGE_BINHOST="" emerge -K cinnamon>>. -K - Tells emerge to only use binary packages (from $PKG...
-
- Hi Alex et al,
I am using the GUI Installer.
I specified the partition (/dev/sda5) for the *root* (/) Mount Poi... -
- Adrien Daugabel wrote:
> _What is the correct procedure for *Logging Out* and *starting a new session* with the Live...
21.10.2015
-
- Mikhail Hiretsky wrote:
> Installation from separate archives (tbz2) It can lead to problems due to lack of the nece... -
- Installation from separate archives (tbz2) It can lead to problems due to lack of the necessary packages. Why do you ...
20.10.2015
-
- Hi Calculaters,
I tried the following.... -
- _What is the correct procedure for *Logging Out* and *starting a new session* with the Live USB environment?_
Humm f... -
- Adrien Daugabel wrote:
> If you test installation from LiveUSB, I think you must restart xdm service (Console TTY Ct...
19.10.2015
-
- I installed Cinnamon on a CLDX distro and I show you the "applet"
!http://img110.xooimage.com/files/b/1/f/screen14... -
- Hi Jose,
I think by the end of the week. -
- Hi,
On my last picture you can see that there are the "power applet" :
!http://www.linuxtricks.fr/upload/calcul... -
- Adrien Daugabel wrote:
> Sorry it's in french, but you can follow that : http://www.linuxtricks.fr/wiki/installer-ci...
18.10.2015
-
18:32 General: RE: Cinnamon Desktop - Which packages need to be installed?
- ...all !! :)
-
- Sorry it's in french, but you can follow that : http://www.linuxtricks.fr/wiki/installer-cinnamon-sur-calculate-linux...
-
- libutil.h --> dev-libs/libbsd
-
- Hi, mnttab.h in the sys-fs/zfs
crtdbg.h in the wine
17.10.2015
-
- While doing my weekly world update I had one compilation failure for kdelibs version 4.14.13-r1 the package is stable...
-
06:57 Calculate Scratch Server: RE: Is there a Calculate Web Server distribution, ready to install and ...
- Hi Alexander, thanks a lot for your reply.
Just to know, Do you have an estimated date for the documentation?
By ... -
- Hi !
_Can the Cinnamon desktop be installed without any problems?_
Yes...
16.10.2015
-
- Hi Calculaters,
Can the Cinnamon desktop be installed without any problems?
Does the installation of Cinnamon c... -
- Alexander Tratsevskiy wrote:
> Take a screenshot to see the problem with displaying Calculate Console.
Hi Alex,
...
14.10.2015
-
- Here's how to make a window on youtube.
!http://s28.postimg.org/upzjjq77h/Capture_C.png!
Here's how you do not ne... -
- Hi !!!!!!
What is the problem ? I don't see ... !?
Explain please
Thanks
13.10.2015
-
- Hi Jose,
Scratch Server - a good choice. This article is outdated. The CL15 uses the new build tools. In the near ... -
- Hello,
I guess Calculate Directory Server (CDS) is going to have too much stuff for what I need in the Web Server, I... -
- Picture widescreen. How to solve the problem?
http://s8.postimg.org/gqu93w58l/snapshot1.png
12.10.2015
-
- Problem will be fixed in calculate-utils-3.4.1.4.
-
02:36 Hardware: RE: Kernel upgrade and nvidia driver
- I force emerge to build the package (adding the flag tools to package.use). When install i disabled flag.
What optio... -
01:16 Calculate Linux Desktop MATE: RE: system not booting into GUI after kernel upgrade
- Thank you for the reference Sergei! It seems I'm not the only one who came across the issue after installation of ker...
11.10.2015
-
- Thanks. This is not the problem. In first post I say about nvidia 340.93.
Content of /etc/portage/package.mask/nvi... -
21:18 Calculate Linux Desktop MATE: RE: system not booting into GUI after kernel upgrade
- http://www.calculate-linux.ru/boards/23/topics/29972?r=29975#message-29975
-
- New nvidia driver not support old video cards.
For fix you need use old drivers.... -
21:11 General: RE: cl-update cron job killing my laptop
- I've been hoping to see an improvement, but my laptops are still getting eaten alive every hour. My settings are for...
-
- (Sorry for the bad english)
After an update (Calculate console/Update the system) it install a new kernel version ...
10.10.2015
-
- * Binary or not ? (purple package = binary, green package = compilation)
I have no clue :( It's a vanilla Calculate ... -
- _why didn't the update process finish within 3 hours? Are the kernel sources + modules compiled or copied as binaries...
-
- Thanks for responding Adrien!
A few questions come to my mind:
* why didn't the update process finish within 3 ho... -
- _- the installation of the new kernel thru the Calculate GUI console took real long: after 3 hours, on a Pentium Core...
09.10.2015
-
- First of all: this is a great distro! I enjoy the experience of coming back to good old Gentoo, without having to wor...
08.10.2015
-
- Yes, we saw this segfault.
07.10.2015
-
- OK.
You can reproduce my bug ? -
- Take a screenshot to see the problem with displaying Calculate Console.
-
- The cause of the error is not found, recompilation is not helpful. We downgrade. We are waiting for when the Portage ...
-
- Hi Alex,
I forgot to mention that it is the XFCE version.
From the Grub menu I chose the 1920 x 1080 resolution... -
- Which distribution do you load a LiveUSB? Can you change the theme and can not see the font from a Calculate Console?...
-
15:23 Calculate Utilities: RE: Template error during grub setup
- OK, first I removed the older "update-grub.new" which got rid of the errors as it updated a new one, but it still wou...
-
13:28 FR : Discussions: Mise à jour du kernel
- Aujourd'hui, mise à jour du kernel : sys-kernel/calculate-sources, Installed versions: 4.1.10 (11:30:21 06/10/2015)
... -
13:09 Hardware: RE: cldx v. 15 video display doesn't load on Lenovo ThinkPad W520
- Thank you for your timely response. I downloaded the Spec sheet but am unsure about what instructions I need to add ...
-
12:48 Hardware: RE: cldx v. 15 video display doesn't load on Lenovo ThinkPad W520
- Hello,
Your laptop use Optimus technology as shown here :
http://www.lenovo.com/shop/americas/content/pdf/system_... -
- I installed v. 15 on a separate partition. After rebooting the grub appears but the screen stays black after that.
... -
error when Updating my boot setup using console-gui
The boot paramaters are being configured..... Failed
Cre...-
- Hello and thanks a lot Mikhail,
Is there a link to a tutorial on how to do all that stuff in the right way? Please ... -
- Hi Alex,...
06.10.2015
-
- Hi all,
Since i updated Firefox to 41 version, when i open a tab => Crash (In console : segfault)
http://pasteb... -
- Hi Michael,
Utilities system assembly Calculate 3.4, came out with a new release Calculate Linux have been complet... -
- You can use CDS. Mail will be managed by server. Apache, php, html, javascript, css files, MySQL database and other t...
-
- Hello,
Given my positive experience with my ongoing test of Calculate Linux Desktop, I would like to know if there... -
- Hi Alex,
p. Thanks for responding.
p. Allow me to clarify my question further.
If I add packages, or make an...
05.10.2015
-
- Hi Michael,
All ISO images - support the work Live USB.
04.10.2015
-
- Hi,
I don't know for all but for VMWare, it works.
If rpm are all in one (no dependencies) you can install rpm pa... -
14:00 General: Installing non-standard/proprietary software
- Hallo,
I'm new to Calculate Linux and don't have any experience neither with CL nor with Gentoo. CL seems very int... -
- Hi Calculaters,
Is it possible to make a Live USB persistent?
I read a topic that said it would be done for ver...
02.10.2015
-
- http://www.calculate-linux.org/boards/15/topics/29561
01.10.2015
-
18:35 General: cl-update generates error from CPU_FLAGS_X86
- When i run cl-update it exits with the message
Invalid '-' operator in non-incremental variable 'CPU_FLAGS_X86': '-a... -
12:01 Calculate Linux Scratch: How to connect to internet with wifi?
- I don't have ethernet, so I have to use only wifi. I would like to use only Openbox, so the CLS. How do I connect to ...
Экспортировать в Atom