Активность
С 29.11.2012 по 28.12.2012
27.12.2012
-
22:28 FR : Discussions: RE: compilation webkit-gtk impossible
- ok, dès que j'ai 2' ;-))
Cordialement -
17:25 FR : Discussions: RE: compilation webkit-gtk impossible
- Salut,
Faudrait que tu fasses un tour sur IRC dans ce cas en utilisant le canal #calculate-fr / Serveur Freenode p... -
- bon, je suis reparti d'une cls vierge :
toute fraîchement installée, sans même faire un eix-sync, j'ai changé le pro... -
15:04 FR : Discussions: RE: compilation webkit-gtk impossible
- C'est moi qui ai besoin d'explication alors (mais ça servira à la communauté tout aussi bien j'espère) ...
Comment... -
- Salut,
Ha ... dans ce cas, pas la peine de toucher au profile ... Tu n'aurais tout simplement pas changer le BINHO... -
- Si je puis intervenir :) parce qu'on le discutait aussi sur le chan.
Ce qui est étrange aussi, c'est que David n'a... -
- Salut,
Combien de place sur le disque, les partitions ?... -
- ouaip.
Et je ne parviens pas à le compiler sous mon vieux p4 : ça plante toujours au même endroit.
Je retente une i...
25.12.2012
-
16:46 General: RE: usb persistence
- Persistence will be implemented in future releases (after version 13 will be released)
24.12.2012
-
- Salut,
Si je suis bien, tu es sous CLS alors ?
Effectivement Webkit-GTK comme la version QT n'est pas préinstal... -
- webkit est nécessaire pour l'install de jumanji et autre midori par exemple.
Je vais suivre ton conseil et install... -
- Salut,
Sur Calculate, tu n'es pas sensé la compiler :... -
- Je signale un souci de compilation de webkit-gtk : elle échoue toujours au même stade :
_DerivedSources/WebCore/libW... -
13:57 General: RE: usb persistence
- It would be good if persistence for USB would be implemented.
Some of the reasons:
- custom configuration for th... -
- Salut,
Je l'avais oublié celle-ci, j'ai rajouté les 2 rubriques en dernier de la liste précédente.
Merci
XKo... -
- XKomodor,
Y a-t-il un dépôt spécifique pour CLS ?
23.12.2012
-
19:24 Calculate Linux Desktop MATE: RE: migrate from base gentoo
- Thanks. It works fine.
It's necessary to check /boot partition size before upgrading.
22.12.2012
-
20:04 General: RE: Problems with IExplorer in WINE [Solved]
- Ok Solved!
Apparently, my company has two separate Portal addresses which read Very similar.
Such as Mycompanypo...
21.12.2012
-
17:42 General: RE: How do i install Kernel 3.7?
- yep
-
17:23 General: RE: How do i install Kernel 3.7?
- Was displayed splash before rebuilding the kernel?
-
- ok i see that it just the splash screen :) but can you tell me how can i display this in the boot ? or am i wrong a...
-
- in the boot its write me...
20.12.2012
-
22:39 General: RE: How do i install Kernel 3.7?
- Do not see a problem
-
- tell me if i have a hardware problem is it safe to downgrade the kernel??
calculate linux come with kernel 3.6 soo... -
- Salut,
Avec plaisir !
N'oublie pas si tu le souhaites t'inscrire sur le :
http://www.calculate-linux.org/maps
... -
- thx work perfect!!
-
- Yes. Try =)
-
17:46 FR : Discussions: RE: Synchronisation de l'heure
- Ok Julien,
Tout est parfaitement opérationnel.
Encore merci pour ton aide et à bientôt,
Christophe
-
- i just want to know how to compile and install a new kernel
i see this help from this link:
http://www.calculate-... -
- hi there i "install" vuze in calculate-KDE by this way:...
-
- Salut Christophe,
La commande ... -
- Salut Julien,
Merci beaucoup pour ta réponse claire (je débute sur Calculate Linux- CLDX) et rapide.
Est-ce que... -
- Salut Christophe,
En root, tu inscris ces informations dans le fichier de configuration _/etc/ntp.conf_... -
- Yep! Due to company site requirements I must sometimes use IExplorer 7 to connect to a Company Site.
I have trie... -
- Bonsoir,
A tout hasard, quelqu'un saurait-il la manière de procéder pour avoir une synchronisation automatique de l'...
18.12.2012
-
- Hi Ruddy,
On the wiki migration guide no. Typically the system is installed from the image.
If I am not mistaken,... -
- Lastly, following the method (Success)...
-
- Arggghhhh!
Last question as my Eric emerge failed..
Here is the fail and the log.
Some direction would be appreci... -
- Ok
Thank You Very Much...
So as I now understand.........
Future packages will NOT be automatically Unmasked.
... -
- Hi,
I would like to migrate from based gentoo installed system to calculate CLDG system. Is there a wiki for that ?
...
17.12.2012
-
- Portage does not change anything without your knowledge. Therefore, the changes need to be confirmed.
-
- Let me add now that I have done an autounmask Keep
Should I now put the unmask option back as it was or will it Not ... -
- You all understand correctly:...
-
- I have been installing either the Eric or Spyder IDE for python for many years.
Never had an issue before as they i... -
- Thanks for the replay..
Yes I will follow your prescription. I found as I had posted that
eix-sync
was the best ... -
- Hi,
Easier to install the last Stage of the image. Tree sync should be done for every update. This is done by the ut...
16.12.2012
-
- Hello All
I have been absent from posting here for at least a year Plus.
A long time Sabayon user since 2005, I ha...
11.12.2012
-
- chaîner grub2 de Calculate Linux derrière un grub1
Added by David Lechevallier-Coussot about 18 hours ago
Lors de...
06.12.2012
-
- Hi Marshall,
Yes they are. Weekly builds are even recommended for install, in fact, if you want the latest image a... -
01:32 General: Are daily ISO images bootable install images
- Are daily ISO builds bootable installation images? In other words, if I burn a daily image, can I then burn it, boot ...
05.12.2012
-
- Salut,
Qu'entends tu pas elle bloque au milieu de l'impression ? Fonctionne t'elle sous un autre système d'exploit... -
16:58 FR : Tutoriels Calculate: imprimante espson
- Bonjour,
j'ai installé une imprimante epson stylus CX3200 .Quand quand je lance l'impression ,le début de l'impressi...
02.12.2012
-
20:25 Calculate Linux Scratch: RE: Adding KDE and other desktops to CLS
- Great! That sounds like a nice improvement. I'll wait till then for doing my system-housekeeping. :)
-
- At present in the file @/var/lib/portage/world@ Installation is only one package @app-misc/calculate-meta@. This meta...
-
- I'm not unfamiliar with CLI package managers, but the main problem I find with eix and emerge is that neither manages...
-
- Comes to the aid program "eix". It's still a console, but its ability to capture the imagination.
30.11.2012
-
- I was wondering kind of the same thing. Is it possible to use CLS to build a "custom" working desktop instead of a li...
-
- That link gives an "unknown host" error. :(
-
- Thx! If I can help with some information, I'll be glad to.
-
- In the evening i'll check and try to find a solution to this problem on my laptop with intel graphic card.
-
- Hello all.
Does somebody know how to fix the "no brightness control after sleep" issue?
Any time after booting ... -
- Great! Updating the kernel to 3.6.7 worked like a charm. Now resume after suspend is fast: one or two seconds.
Tha...
29.11.2012
-
- Yes, those are the kernel sources, and updating your system could actually help. The symptoms you're describing are p...
-
- Thanks Elena. I'm on CLD 12.0.3 stable, with kernel 3.5.3. calculate-sources are the kernel sources? If so, I could t...
-
- As for merging all forums in just one... that's what the case with the English and the French ones, as you can see: n...
-
- Hi again :)
What's the kernel you're on? Is is a stable CLD version or a stage version that you are using?
Please... -
- Hi. I'm on the latest CLD release and I'm experiencing some problems with sleep/resume.
One at a time: first of al...
Экспортировать в Atom