Активность
С 02.07.2012 по 31.07.2012
31.07.2012
-
11:07 Calculate Linux Desktop KDE: RE: Can't go to root in terminal! And sudo not possible
- By default, you may use <<su>> with root password (if user has @wheel@ group) or <<ssh root@localhost>> with root pas...
-
05:04 Calculate Linux Desktop MATE: RE: Increasing the system performance
- Ok so everything went fine with that command, sorry took so long to reply but I could not check the status until I go...
-
00:45 Calculate Linux Desktop KDE: RE: Can't go to root in terminal! And sudo not possible
- Well, "out of the box", CLD version 12, does not allow sudo at the desktop. I think I will work on this some more, an...
-
- Yes, this user is in the wheel group.
I was able to activate the root account, I re-installed CL 12.
However, I...
30.07.2012
-
22:58 Calculate Linux Desktop KDE: RE: Can't go to root in terminal! And sudo not possible
- Is your user in the @wheel@ group?
-
- Set up CL 12 Desktop and set up my root password in the installer. Bottom line is that I can't su to root in a termin...
-
- Thank you very much for the help, it is running now! I will post back once it is done. :-)
-
- Thank you for the offer to chat on IRC, will take you up on it once I have some free time. :) Also thank you for the ...
-
16:47 Calculate Linux Desktop MATE: RE: Increasing the system performance
- Try run <<eix-sync>>, after this run <<emerge -uaDN world>> again
-
16:46 General: RE: Calculate Linux Desktop Gnome 12 Screenshots
- Hello Marc,
I come from France, south-west exactly ... Toulouse is my city.
If you have some problems or not ..... -
- Hello Julien,
Thank you and I am from VA. USA. I have added myself to the map as well. :-) -
- Hi Marc,
Welcome to here ! :D
Nice screenshot ... ;)
Where are you come from ? ... Don't forget the Calculat... -
- Hello All,
So I am new to CLDG and the forum. Wanted to post my current setup. :-)
Theme Info: http://mmesantos1... -
- Hello,
I am running Calculate Linux Gnome x64 and I am trying to Increasing the system performance by running emerge... -
- Salut,
Jamais eu ce problème en particulier donc difficile de pouvoir te donner une réponse qui solutionne ton pro... -
03:24 FR : Discussions: RE: Problem d'update 11.15 a 12
- salut,
Que veut dire cette expression * tu n'as pas eu de bol à ce sujet ...*
histoire de parfaire mon éduca... -
- Salut,
Avec plaisir, mais franchement tu n'as pas eu de bol à ce sujet ...
Personnellement, il n'y a jamais bes... -
- Peut-être que cela est du au système de fichier que j'avais utilisé lors de l'installation initiale. J'ai installé ca...
-
- non y vraiment rien à faire... J'avais essayé précédemment de réinstaller gawk !
J'ai refait l'exercice au compl...
29.07.2012
-
- Salut,
Maintenant fais la même chose avec gwak que tu as fait avec wget, le réinstaller et... -
- dispatch-conf = résultat de commande * quelle est l'option ? *
>> q quit, h help, n next, e edit-new, z zap-new, u... -
- Salut,
Maintenant il semble qu'il faille mettre à jour des fichiers de configuration :... -
- Bonjour,
Voici le résultat des commande:
calculate houlala # emerge -qv wget
>>> Emerging binary (1 of 1) net... -
- Salut,
Je te propose d'essayer de réinstaller wget en faisant simplement :... -
- Salut,
Oui j'ai toujours effectué les mise à jour depuis mon installation de la 11.15 !
Ce problème survient u... -
- Salut,
A quel moment as-tu ce message, après avoir lancé eix-sync, ... ?
Ton système est fraichement installé o... -
- Salut les amis Calculate Linux,
Voici j'ai ce problème qui semble être récurant en 64bit :
Verifying ebuild ...
28.07.2012
-
05:53 Calculate Linux Desktop KDE: RE: 11.15 KDE Lengthy Installation
- Situation resolved , i went out and bought a nice 8GB usb stick, used unetbootin, and the installation flew and was d...
-
04:52 Calculate Linux Desktop KDE: RE: 11.15 KDE Lengthy Installation
- Nankura,
Under just curious how much ram have you got ? And how close to the min's is your machine ?
I found that i... -
- Koffee,
Looking through Gentoo's handbook, last night, I found this chapter on firewalls
http://www.gentoo.org/...
27.07.2012
-
- hey guys, no real "problems" , it installs eventually, but even after choosing the liveDVD ram option. the installati...
-
- Not at all, your're welcome:)
-
- thanks so much for the help, im such a bother xD
26.07.2012
-
- Binaries come now by default everywhere, including in CLS... enjoy :)
I personally am not a KDE user, so I can't r... -
- thanks for the speedy response, i am setting up the Scratch version as we speak, but question. you menchoned binary k...
-
- As for kernel updates, binary kernels will be updated automatically with emerge, but for non-binary ones you will hav...
-
- Hello,
In fact, Calculate _is_ a preconfigured Gentoo. Thus the update procedure, unless you update in a separate ...
25.07.2012
-
23:09 Calculate Linux Desktop KDE: RE: Old versions of Calculate
- Hello,
ftp://ftp.local.calculate.ru/pub/calculate/CLD/old/ -
14:47 Calculate Linux Desktop KDE: Old versions of Calculate
- Hello,
Where can I get old verions 9/10 of Calculate?
The new ones on KDE fails on my configuration.
Thanks -
- hey guys
Basically, would the process in the updating guide update from 11.15 to 12. including kernel upgrades and...
24.07.2012
-
- I didn't actually think of grabbing an update...
thanks for the information about Clonzilla.
23.07.2012
-
19:00 General: RE: a dying hard drive
- Ouch! Clonezilla! Good one! I forgot all about it and that is a good solution!
:)
Glad you got it installed. Ye...
22.07.2012
-
- Hello,
If you want to clone your hdd, you can use to http://clonezilla.org/
I have not had any problems with th... -
- Koffee,
Thanks for the advice.
I removed the boot partition and the problem disappeared. Calculate installed i... -
- HI! I'm new to Calculate and 'learning' Gentoo myself.
First, have you had experience with Gentoo and Gentoo based... -
- Hi, this is maybe simple for the Calculate team to answer.
First thing I did on installing CLDX was upgrade.
On...
21.07.2012
-
- Hello,
Last week I installed Calculate into my machine.
On Saturday the boot screen tells me the hard drive is dy...
20.07.2012
-
- What versions of calculate-lib,pyxml and python are installed?
-
18:54 Calculate Linux Desktop XFCE: ImportError: cannot import name xpath error after updating
- hi,
I'm getting following error ...
19.07.2012
-
- Thanks for your reply! Appreciate it.
I did check that. If eix were an older version. I just did a world update.
...
14.07.2012
-
- Lors de la réinstallation de mon portable IBM x61 animé par le processeur Core2duo T7500 sous Calculate Linux KDE 12....
13.07.2012
-
- Update app-portage/eix to 0.26.0 version.
-
- 1. I ran: eix-remote update
I only got one overlay, Gentoo experimental to update?
Everything else gave this messsa...
12.07.2012
-
h1. Gestionnaire graphique des Utilitaires Calculate
{{TOC}}
h2. Introduction
Calculate Console GUI est un...
11.07.2012
-
- Thanks.
That was really quick.
The assistance is greatly appreciated -
- Hello,
The make.conf is in /etc/
You can adjust your USE FLAGS in bottom of the file with for example :... -
- `cat /etc/make.conf`
to view the current flag, run `emerge --info` -
- Hello,
Being new to Calculate Linux I am wanting to locate my make.config file with the use flags.
I know it's some...
10.07.2012
-
11:01 General: RE: Install Calculate linux
- Hossein Naghdbishi wrote:
> Thanks,But that is now too
> http://pastebin.calculate-linux.org/en/show/3898
> http:/... -
09:45 General: RE: Install Calculate linux
- Thanks,But that is now too
http://pastebin.calculate-linux.org/en/show/3898
http://paste.kde.org/514874/
and I don... -
- Hello Nossein,
Having only installed Calculate Linux yesterday perhaps I should not be doing this, but welcome to ... -
- {{TOC}}
h3. Préambule
Il y a quelque temps, je travaillais sous Calculate Linux Desktop XFCE, qui est une distr...
09.07.2012
-
- Hi all,
Here is the screen captures :
With 3.8.8 at 6 min after boot just after login in KDE :
http://pix.toil... -
16:48 Calculate Directory Server: Redirect start menu forlder
- I'm trying to switch from sbs2k3 (too less licenses) to CDS. How can i redirect all users start menu folder to the on...
-
16:44 General: RE: cl-install --autopartition --video ???
- Денис Спиридонов wrote:
> What parameters do you use?
> And can you show the result of
> [...]
>
> ?
I hav... -
- Денис Спиридонов wrote:
> Calculate Linux wrote:
> > I test css-11.12-*i686*.iso, it's success.
> >
> >
> > I ... -
- What parameters do you use?
And can you show the result of... -
- Can you make a screenshot? You use the value from top?...
-
- ...
-
- What options you have installed? And that you used: cl-install, cl-console or cl-console-gui?
-
- Any idea?
-
- Hi all,
After several tests with the kernel 3.3.8, it shows that it is a system overload, as well as on Gentoo Lin... -
- I used css-20120706-x86_64.iso
-
- Calculate Linux wrote:
> I test css-11.12-*i686*.iso, it's success.
>
>
> I test css-11.12-*x86_64*.iso, same p... -
- Same Machine, I install CentOS6.2-x86_64.iso, everything are OK
-
- Hi all
I want install calculate linux but I get some error
http://paste.kde.org/514334/
and the log is
http://pas... -
- pls pls pls
08.07.2012
-
- some stuff:
https://wiki.archlinux.org/index.php/Intel#KMS_.28Kernel_Mode_Setting.29
https://wiki.archlinux.org... -
- i686 is a 32-bit build and x86_64 is naitive 64-bit
so ,It's x86_64, not i686, but after install x86_64, it's boot... -
- Why css-20120702 x86_64 livecd boot success, but when I installed CAN'T boot success?
-
- my server hardwares like this:
http://configure.ap.dell.com/dellstore/config.aspx?oc=u421204au&c=au&l=en&s=bsd&cs=... -
- I test css-11.12-*i686*.iso, it's success.
I test css-11.12-*x86_64*.iso, same problem, (Installed OK, but reboo... -
- ...
-
- I will be able to see on Monday. Try CLS, if you want to build desktops.
-
- I have try:
css-20120702-x86_64.iso
css-11.15-x86_64.iso
livecd boot successful, but when I installed, after r... -
- If you want to configure LDAP, and other services depend on it, use ready-made solution Calculate Directory Server. N...
-
08:46 General: RE: Newbie problem, unfamiliar with portage commands, C and USE flags
- Thank you, that sequence seems to work most of the time, but how do I make those USE changes necessary?
-
- >yes, livecd works!
>after installed, It's crashed at "Load frame buffer video driver"
Which version you have ins... -
- my new machine use *Intel Pentium G630*
http://ark.intel.com/products/53483/Intel-Pentium-Processor-G630-(3M-Cache... -
- Alexander Tratsevskiy wrote:
> video driver on the livecd works?
yes, livecd works!
after installed, It's cras... -
- ...
07.07.2012
-
- video driver on the livecd works?
-
- My main point is, whenever I get this sort of message, what command do I execute in order to get the package installe...
-
- ...
-
- cpu: intel G630
-
- When I install c12 0702 , then reboot, when I from grub into initd, my computer monitor display black screen. and can...
-
- What choices does this '--video' contain?
-
- I'm sorry, can someone walk me through this, I have no idea what command proceedings to actuate next, how do get it c...
06.07.2012
-
- Hello,
If you want to install the CLD or CLDS environnement, you can try with :... -
- >Can release c12 tomorrow? not beta
This month - exactly. We strive for quality. -
- Greetings everyone, I recently switched from Arch 2011 to a freshly installed Calculate Linux, so this is my first ti...
-
- pls pls pls pls pls pls
-
- pls pls pls
05.07.2012
-
- Can release c12 tomorrow? not beta
-
- thanks
-
- Hello,
Before, try to fixe a root password in a terminal with :... -
- cl-install --autopartition --ip eth0:yes:192.168.59.155:24 --hostname s55.example.com
it tell me "Missing root pas... -
- http://www.calculate-linux.org/main/en/interactive_system_build If your flash memory size by more than 2 times the si...
-
04:08 General: RE: Adding-Removing software with Calculate Linux
- I found this link: http://www.calculate-linux.org/main/en/add_and_remove_programs, but it seems complicated, it seems...
-
- How can I add or remove software with Calculate Linux 12 beta, I install on live usb, and i would, for exemple, to in...
04.07.2012
-
- waiting c12
-
- Testing...
Экспортировать в Atom