Update and grub

Today i did Update CLD and update kernel on version 4.19.24. Now grub don"t see 2 linux distributions that are on btrfs partitions. Plus when boot up the CLD it prints messages that RC has been updated and many messages

boot.log after update. Who is this devil? grub don"t see 2 linux distributions that are on btrfs partitions.
Do you have any help or withdraw more from this CLD distribution. It’s frustrating 3 dažs all ok, then update, one update is over, then some update and there is a haos.

INIT: version 2.91 booting

e%G
e[1me[32mOpenRC e[1me[36m0.38.3e[m is starting up e[1me[34mCalculate Linux (x86_64)e[m

e[1me[32m*e[m /proc is already mountede[K
e[1me[32m*e[m /run/openrc: creating directorye[K
e[1me[32m*e[m /run/lock: correcting modee[K
e[1me[32m*e[m /run/lock: correcting ownere[K
e[1me[32m*e[m Caching service dependenciese[K …
e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m
e[1me[32m*e[m Caching service dependenciese[K …
e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m
e[1me[36mhostname e[m| e[1me[32m*e[m Setting hostname to calculate e[K …

e[1me[36mdevfs e[m| e[1me[32m*e[m Remounting devtmpfs on /deve[K …

e[1me[36msysfs e[m| e[1me[32m*e[m Mounting debug filesysteme[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mdevfs e[m| e[1me[32m*e[m Mounting /dev/mqueuee[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mcgroups e[m| e[1me[32m*e[m Mounting cgroup filesysteme[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mopentmpfiles-dev e[m| e[1me[32m*e[m Setting up tmpfiles.d entries for /deve[K …

e[1me[36mudev e[m| e[1me[32m*e[m Starting udeve[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mudev-trigger e[m| e[1me[32m*e[m Generating a rule to create a /dev/root symlinke[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mudev-trigger e[m| e[1me[32m*e[m Populating /dev with existing devices through ueventse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mmodules e[m| e[1me[32m*e[m Loading module f71882fge[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mhwclock e[m| e[1me[32m*e[m Setting system clock using the hardware clock [UTC]e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mloopback e[m| e[1me[32m*e[m Bringing up network interface loe[K …

e[1me[36mprocfs e[m| e[1me[32m*e[m Mounting misc binary format filesysteme[K …

e[1me[36msysctl e[m| e[1me[32m*e[m Configuring kernel parameterse[K …

e[1me[36mfsck e[m| e[1me[32m*e[m Checking local filesystems e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mbinfmt e[m| e[1me[32m*e[m Loading custom binary format handlerse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mfsck e[m|CLD-17.6R: чист, 953355/4676672 датотеке, 6614059/18730496 блока

e[1me[36mfsck e[m|CLD-17.6H: чист, 130888/5914624 датотеке, 5759974/23654912 блока

e[1me[36mfsck e[m|CLD-17.6B: чист, 243/64000 датотеке, 27122/256000 блока

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mroot e[m| e[1me[32m*e[m Remounting root filesystem read/writee[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mroot e[m| e[1me[32m*e[m Remounting filesystemse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mswap e[m| e[1me[32m*e[m Activating swap devicese[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mlocalmount e[m| e[1me[32m*e[m Mounting local filesystemse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mopentmpfiles-setup e[m| e[1me[32m*e[m Setting up tmpfiles.d entriese[K …

e[1me[36murandom e[m| e[1me[32m*e[m Initializing random number generatore[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mbootmisc e[m| e[1me[32m*e[m Creating user login recordse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mbootmisc e[m| e[1me[32m*e[m Wiping /tmp directorye[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mtermencoding e[m| e[1me[32m*e[m Setting terminal encoding [UTF-8]e[K …

e[1me[36mdbus e[m| e[1me[32m*e[m Starting dbuse[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36msyslog-ng e[m| e[1me[32m*e[m Checking your configfile (/etc/syslog-ng/syslog-ng.conf)e[K …

e[1me[36mnet.lo e[m| e[1me[32m*e[m Bringing up interface loe[K

e[1me[36mnet.lo e[m| e[1me[32m*e[m Caching network module dependenciese[K

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mconsolefont e[m| e[1me[32m*e[m Setting console font [ter-v18n]e[K …

e[1me[36mkeymaps e[m| e[1me[32m*e[m Setting keyboard mode [UTF-8]e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mkeymaps e[m| e[1me[32m*e[m Loading key mappings [sr-unicode]e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36msyslog-ng e[m| e[1me[32m*e[m Starting syslog-nge[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mconsolekit e[m| e[1me[32m*e[m Starting consolekite[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mxdm e[m| e[1me[32m*e[m Setting up sddme[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mnet.lo e[m|need dbus

e[1me[36mnet.lo e[m| e[1me[32m*e[m 127.0.0.1/8e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mnet.lo e[m| e[1me[32m*e[m Adding routese[K

e[1me[36mnet.lo e[m| e[1me[32m*e[m 127.0.0.0/8 via 127.0.0.1e[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

INIT: Entering runlevel: 3

e[1me[36mteamviewerd e[m| e[1me[32m*e[m Starting teamviewerde[K …

e[1me[36mvixie-cron e[m| e[1me[32m*e[m Starting vixie-crone[K …

e[1me[36mnumlock e[m| e[1me[32m*e[m Enabling numlock on ttyse[K …

e[1me[36mbluetooth e[m| e[1me[32m*e[m Starting bluetoothe[K …

e[1me[36manydesk e[m| e[1me[32m*e[m Starting AnyDesk servicee[K …

e[1me[36mNetworkManager e[m| e[1me[32m*e[m Starting NetworkManagere[K …

e[1me[36mfuse e[m| e[1me[32m*e[m Starting fusee[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36msshd e[m| e[1me[32m*e[m Starting sshde[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[1me[36mNetworkManager e[m|
Connecting. 1se[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

Connecting… 0s [offline]

e[1me[36mNetworkManager e[m| e[1me[32m*e[m Marking NetworkManager as inactive. It will automatically be markede[K

e[1me[36mNetworkManager e[m| e[1me[32m*e[m as started after a network connection has been established.e[K

e[1me[33mnetmount e[m| e[1me[33m*e[m WARNING: netmount will start when NetworkManager has startede[K
e[1me[33mNetworkManager e[m| e[1me[33m*e[m WARNING: NetworkManager has started, but is inactivee[K
e[1me[36malsasound e[m| e[1me[32m*e[m Restoring Mixer Levelse[K …

e[1me[36mcalculate-core e[m| e[1me[32m*e[m Start calculate coree[K …

e[1me[36mcupsd e[m| e[1me[32m*e[m Starting cupsde[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

e[Ae[186G e[1me[34m[e[1me[31m !! e[1me[34m]e[m

e[1me[31mcalculate-core e[m| e[1me[31m*e[m ERROR: calculate-core failed to starte[K
e[1me[36mlocal e[m| e[1me[32m*e[m Starting locale[K …

e[Ae[186G e[1me[34m[e[1me[32m ok e[1me[34m]e[m

You have to use Ultimate Boot cd, and grub application on that CD. That will help. Look under hdd section.

The problem is a bit cheaper, I’m going to pick up all linux and win10 with Manjaro linux, and I have the main grub and boot any linux. I have a 6-7 linux distribution. Now I wanted to try the same distribution on the ext4 file system and the btrfs file system. The problem is that Calculate the version 17.xxx I installed long ago insisted on being btrfs and I installed it on ext4. Now all of these distributions have for no apparent reason stopped seeing the linux that is on the btrfs file system. Only Mananjo who clone Arch itself has a GUI installer see everything and I set him up as the main linux and his grub menu all sees and displays on the screen. grub.cfg is updated whenever a new kernel version arrives, in calculate it is more rarely in Manjara or Neon or Kali more often. Plus, I also use the mainline kernels for Neon distribution.
Whether this grub.cfg creation / updating process works as an update-grub or otherwise a command from which make alias the update-grub can be made is irrelevant, it is important that in this process on the screen system want to print all the linux that exist on PC and that does not happen.

Log into manjaro
Log into terminal.
Type
sudo grub-mkconfig -o /boot/grub/grub.cfg

sudo grub-install /dev/sd… (in my case Hdd is sda)

it would be in my case
grub-install /dev/sda

It should display every Linux that you have on your PC.

The problem is a bit more complex,
command: grub-mkconfig -o /boot/grub/grub.cfg
in Ubuntu is: update-grub or update-grub2
update grub is an alias command:
grub-mkconfig -o /boot/grub/grub.cfg
The first problem with me is the fact that every linux distribution is my SSD disk where boot is seen as sda, the other linux sees as sdb.
The problem is that I use the MBR and uefi is excluded.
The problem is that there are no SATA and SSD drives in the dzamper and all drives
completely equal, pulling out the SATA cable from one disk and moving it to another, and from that move to this, and a total chaos arises.
When I install a new linux distribution, it always wants to place boot on the first disk, the problem I do not want to change the boot menu, but I have to pay careful attention to which SSD drive is in this live installation and do not send a grub to it rather than its own / partition.
This has worked so far, with a lot of attention to make no mistake. Every Linux except Manjara sets its own grub to own / partition. I’m using the btrfs file system now, and I’ve tried the btrfs file system now, and the only Manjaro is to see all the linux distributions and its grub and boot menu are ok, the second Manjaro, which also instal btrfs file system see all the linux distributions and its grub.
Other linux distributions do not recognize btrfs. Windows 10 is totally separate from me and its MBR does not contain anything except win10 because I’ve disabled other drives when installing. The system rises over the grub menu from the Manjaro.